company tower banner
Adfast Company Logo

ADBOND 5635GF-6K

1 of 10 products in this brand
ADBOND 5635GF-6K is a liquid polyurethane mono-component adhesive that vulcanises with moisture. It is used to bond rigid insulation polyurethane foam, expanded or extruded polystyrene, wood, cardboard honeycomb, particle panel, MDF, or certain plastics. Used for bonding between two flexible materials or a flexible and a rigid material. Never used for bonding two rigid materials

Product Type: 1K (1 component) Adhesive, Solvent free (100% Solids) Adhesive

Application Area: Sandwich Panels

Compatible Substrates & Surfaces: Plastics, Polystyrene (PS), Wood

Cure Method: Moisture Cure

Application Method: Brush, Roller

Chemical Family: Polyurethanes (PU)

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Features & Benefits

Ready-to-Use Product Features

Applications & Uses

Application Area
Application Method
Compatible Substrates & Surfaces
Cure Method
Method Of Use

It can be applied using compressible bottle, roller, manifold or mechanical roller. For optimum results the adhesive should be applied at a temperature of 18°C (65°F) to 25°C (77°F). It is recommended to apply 100 to 150 g/m² of adhesive (depending on the porosity or nature of the substrates) and then spray a mist of water (10% of the adhesive weight) over the adhesive before substrates assembly and put ii under pressure. It is strongly advised to install a thermometer / hygrometer near the assembly station.

Application
  • Sandwich panels
  • Lamination
Cleaning

For cleaning the mechanical rollers, first use the ADSOLVE DP60011 to remove as much adhesive as possible by rotating the mechanical rollers in reverse. Then clean thoroughly with the ADSOLVE 6040. For manifold systems cover the nozzles with hydraulic oil to completely block moisture infiltration. For any other equipment clean before curing of the product with the ADSOLVE 6040. Cleaning solvents must be recovered and send to an accredited company for the destruction of hazardous materials.

Properties

Physical Form
Physical Properties
ValueUnitsTest Method / Conditions
Viscosity4900 - 6000cPs-
Specific Gravity1.095 - 1.105kg/L-
Solids Contentmin. 99%-
Cold Resistance (Uncured, Possible Reversibility)Protect from freezing--
Typical Properties
ValueUnitsTest Method / Conditions
Open Time (At 25°C - 50% H.R.)120 - 200minutes-
Full Cure24.0hours-
V.O.C.0.04g/L-

Regulatory & Compliance

Certifications & Compliance

Packaging & Availability

Packaging
  • 18.9 liters pail
  • 220 kg drum
  • 1100 kg tote tank

Storage & Handling

Shelf Life
9 months
Storage

The adhesive has a shelf life from 3 to 9 months from production date depending on different grade, in the original closed container and stored in a cool, dry place (10 to 25 °C). Protect from frost. Keep container tightly closed to prevent contamination. Open drums must be protected from moisture with nitrogen or desiccant.