Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Advantages and Features
- All-in-one easy to use system in pre-measured containers
- Pave from 3/4 in. to 10 in. cross-sections
- Rapid cure - open to traffic in < 3 hours @ 75 °F (24 °C)
- High tensile strength coupled with high elongation for superior rutting resistance
- High early bond strength
- Non-shrink
- Moisture insensitive
- Excellent oil and chemical resistance
- No field chemistry required
- Made in the USA in accordance with CFR 49 section 50101
Applications & Uses
- Markets
- Applications
- General Uses & Applications
- Extends deck life in bridges and parking structures
- Bridge nosing material for joint headers and edges
- Repairs concrete spalls
- Levels or corrects concrete grading or ruts
- Rehabilitates concrete flooring and loading docks
- Installation and Coverage
In order to achieve maximum results, proper installation is imperative. Coverage may vary according to the porosity of the concrete. 1.6 gallons (6.1 L) epoxy plus 113 lb. (51.3 kg) of aggregate yields approximately 1 ft.3 (0.03 m3).
- Clean Up
Always wear appropriate personal protective equipment such as safety glasses and gloves. Clean uncured materials from tools and equipment using a mild solvent, such as CRACKBOND® INDUSTRIAL CITRUS CLEANER from Adhesives Technology Corp. Cured material may only be removed mechanically using a sander or grinder. Collect with absorbent material. Flush area with water. Dispose of in accordance with local, state and federal disposal regulations.
- Limitations and Warnings
- For professional use only
- Do not thin with solvents, as this may affect cure
- Concrete should be a minimum of 28 days old prior to applying as overlay
- Compressed air equipment must have an oil/air separator
- BRIDGE-GARD is a vapor barrier after curing
- For placements > 10 in. and/or structural applications, contact an ATC representative
- Consult ATC when mixing or placing outside of the temperature recommendations listed.
- Cure Schedule
Temperature
°F (°C)Cure Time 62 (17) 4.5 hr 67 (19) 4 hr 72 (22) 3 hr 77 (25) 2.5 hr 82 (28) 2 hr 85 (29) 1.5 hr
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Compressive Strength (24 hrs, 75°F) | 4,750 (32.8) | psi (MPa) | C39 |
Consistency or Viscosity (75°F) | 103.0 | cP | D2556 |
Gel Time - 60 Gram Mass (75°F) | 20.0 | min | C881 |
Modulus of Elasticity (75°F) | 1,800,370 (12,413) | psi (MPa) | C469 |
PPC Bond Strength (24hr, 75°F) | 575 (4.0) | psi (MPa) | CP-L4302 |
Rebound Hammer (4hr, 75°F) | 3,750 (25.9) | psi (MPa) | C805 |
Surface Abrasion Resistance (75°F) | No Abrasion Loss | — | CT 550 |
Tensile Bond Strength to Concrete (24 hr, 75°F) | 490 (3.4) | psi (MPa) | C1583 |
Tensile Elongation (7 day, 75°F) | 59.2 | % | D638 |
Tensile Strength (7 day, 75°F) | 3,960 (27.3) | psi (MPa) | D638 |
Water Absorption (7 day, 75°F) | 0.68 | % | D570 |
Technical Details & Test Data
- Specification
The epoxy overlay system shall be an epoxy system supplied in pre-measured containers. At 7 days and a temperature of 75 °F (24 °C), the neat epoxy shall have a tensile strength of 3,960 psi (27.3 MPa) and an elongation of 59.2 % per ASTM D638. The epoxy overlay shall be CRACKBOND BRIDGE-GARD from Adhesives Technology Corp., Pompano Beach, FL.
Packaging & Availability
- Availability
Adhesives Technology Corp. (ATC) products are available online and through select distributors providing all your construction needs.
- Packaging
Package Size 0.67 ft3
(19 L)1.34 ft3
(38 L)Part # BG0671 BG1342 Pallet Qty. 72 units 72 units Part A
144 units Part BPallet Weight (lb.) 1,391 1,927
Storage & Handling
- Storage and Shelf Life
For best results, store between 50°F (10°C) and 95°F (35°C). Shelf life is 24 months when stored in unopened containers in dry and dark conditions.