MicroKleen

MicroKleen™ AD1-919 - Spray and Equipment Cleaner is used to clean and/or flush application tools and spray equipment, following the application of Adsil Clear Inorganic Reacted Siloxane Protective Treatments. MicroKleen™ AD1-919 can also be used to clean up drips, spills and over spray before the Adsil Clear Reacted Siloxane products dry to touch.

MicroKleen™ AD72-930 - Final Rinse is used to affect a final cleaning, rinse and pH neutralizing of HVAC/R aluminum or copper coils and fin-packs before the installation of MicroGuard® AD35 Clear Coil Protective Treatment. Final Rinse will also help remove any remaining soap film residue or other surface contaminates lingering on the surface from the initial cleaning process.

MicroKleen™ PLC-1 - Industrial Cleaner and Degreaser is a concentrate formula, which provides deep penetrating and lifting action for removal of tough surface contaminates. With its penetrating cleaning action, it is effective on oily residues, surface soiling contaminates and mold spores. This innovative cleaner contains a unique blend of highly active components, which are very effective for most general cleaning purposes. MicroKleen™ PLC-1 works exceptionally well on HVAC/R coils and cabinets, ceramic tile, terrazzo, concrete, aluminum, copper, brass, bronze, stainless steel, painted surfaces, etc.

MicroKleen™ PLC-AN - Phosphoric Acid Etch & Clean is designed for neutralizing the high pH of porous lime grout and concrete surfaces prior to the application of MicroGuard® Clear Siloxane Finishes. In addition to etching and neutralizing these surfaces, this product will also clean and remove concrete surface laitance or efflorescence and light, oily contamination. PLC-AN may also be used to remove cuprous oxide or copper sulfate from copper and tarnish from non-ferrous or stainless metals.

MicroKleen™ PLC-40 - Siloxane Stripper effectively dissolves cured MicroGuard® Clear Siloxane films, one layer at a time. For stripping multiple siloxane coating layers, directional steps 3 through 6 will need to be repeated for each coating layer to be removed.