Products

163gsm Twill Weave Glass Fabric, often known as Style 92110, is compatible with polyester, vinyl ester and epoxy resin systems. The twill weave offers excellent drapability over compound curvature. Often used as the surface layers on tooling applications to minimize surface fiber print.

Plain Weave Woven Rovings are available in the following weights: 280, 325, 400, 600 and 1080 gsm. Rolls are 1.27m wide and is sold per kg.

300 gsm Unidirectional T700 is a range of unidirectional carbon tapes manufactured from Toray T700 carbon. A glass weft insert improves the ability to infuse this product, while the thermofixing provides stability when cutting narrow tapes. Standard width is 500mm, but tapes can be slit to 50mm width. This product is sold per linear meter.

106gsm Plain Weave Glass Fabric , style 2116, is a very tightly woven fabric, ideal for lightweight structures. The fine weave pattern reduces pinholes and provides an excellent surface finish.

200 gsm Plain 3K Carbon Plain Weave Carbon is woven over-one-under-one leaving it with a simple grid pattern appearance. This carbon fiber cloth is suitable for use in wet-lay, vacuum bagging and resin infusion manufacture as well as for use as a single surface layer where parts are being made to look like carbon fiber (skinning).

CoreLite Board® is a cost-effective closed-cell PVC foam specially formulated to provide high physical properties and be recyclable. Engineered for easy workability, weatherproof and insulation properties, and excellent fire behavior. It is characterized for its phenomenal screw retention and amazing resistance to moisture; it will not rot, mold or mildew. It is also compatible with multiple resins and adhesives.

Chopped Glass Fibers 12,7 mm and 6.4 mm are sold per kg.

220 gsm D5 Stitched Triax Fiberglass is sold per square meter.

Chopped Glass Fibers 12,7 mm and 6.4 mm are sold per kg.

Nidaplast is a polypropylene honeycomb covered or not on both faces with a soft polyester non-woven fabric.

Twill weave fabric at the 200gsm weight is the most commonly used carbon fabric of all. In this pattern the weft goes over two intersecting warps and then under two (hence 2/2) to create a woven fabric with a predominantly diagonal pattern to it. It is suitable for use in wet-lay, vacuum bagging and resin infusion manufacture as well as for use as a single surface layer where parts are being made to look like carbon fiber (skinning).

Mycell is a closed cell, cross-linked PVC foam which contains no CFC. It is suitable for all sandwich composite applications and has DNV-GL certifications. This self-extinguishing foam offers excellent chemical resistance, thermal insulation capabilities and negligible water absorption. Mycell is compatible with most common resin systems including epoxy, polyester and vinylester.

6oz (200gsm) Plain Weave Glass Fabric is designed for surfboard manufacture with a sizing (fiber finish) that provides easy wet out, high clarity and softness for superior fabric handling. The balanced weave fabric is 1.3m wide and is sold per linear meter.

4oz (124gsm) Plain Weave Glass Fabric is designed for surfboard manufacture with a sizing (fiber finish) that provides easy wet out, high clarity and softness for superior fabric handling.

Aerotex 5 oz glass Tape is available in 25, 50, 75 and 100 mm width and sells per 100 m roll.

175 gsm plain weave, Style 281 fabric. Aramid fabrics are woven from Kevlar or Twaron very high tenacity fibers with excellent mechanical properties in tensile strength and elongation-to-break. Aramid fabric has excellent abrasion resistance and laminates can offer improved toughness. Aramid fibers are typically gold in color and require very sharp shears for cutting. Aramid is difficult to sand and is adversely affected by UV light so it is often covered by laminate or paint.

Plain weave carbon tapes are manufactured from 12K, T700 carbon tow. They are available in 25, 50, 75, 100, 150 and 300 mm wide and is sold per linear meter.

Lightweight Plain Weave Fiberglass is very light weight 25gsm, 48gsm and 81gsm plain weave glass fabrics, which are ideal for laminating model aircraft structures. The fine weave is also useful for reducing pinholes on the surface of composite components.

280gsm Twill Weave Glass Fabric, often known as Style 92125, is compatible with polyester, vinyl ester and epoxy resin systems. The twill weave offers excellent drapability over compound curvature. This is the standard glass fabric used in light aircraft applications. It is also widely used for making molds, providing structure behind the finer weave surface fabrics.