Knowde Enhanced TDS
Identification & Functionality
- Carrier
- CASE Ingredients Functions
- Technologies
- Product Families
- Chemical Composition
Modified polyvinyl polymer, silicone free
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Applications
- Application Method
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Cure Method
- Addition and Dosage
0.1- 0.7% on total formulation. In general under normal conditions, the dosage is 0.15 – 0.30% based on total formulation.
- Incorporation
As a strong defoamer, AFCONA-2020 is recommended to be incorporated prior during pre-mix. If added subsequently, good dispersion must be ensured
Properties
- Physical Form
- Appearance
- Clear to slightly yellowish liquid
- Typical Properties
- Product Properties
AFCONA – 2020 is a very strong defoamer for most solvent-based systems. Even at low dosage AFCONA-2020 already can act as a very strong defoamer. Strong defoamers have strong incompatibility, therefore, AFCONA – 2020 can easily causes in-can haziness in high gloss clear coats even at low dosage. However, in the dry film the influence on gloss is minimal. AFCONA-2020 is suitable for solvent- based coatings, printing inks and thermosetting resin systems. It eliminates foam and blistering, regardless whether the air bubbles are caused by the substrate.
As mentioned, AFCONA-2020 has very high defoaming as well as anti-foam properties. In most cases, the de-aeration property is satisfactory. To improve further the de-areation performance, a combination with silicone defoamers like AFCONA-2023 or AFCONA2045 at 0.1-0.2% is recommended. AFCONA-2020 is particularly suitable for the following applications:
1) Nitrocellulose lacquers and acid-cured wood finishes especially those applied by curtain coaters.
2) Two-component polyurethane lacquers, except for high gloss clear (due to it high incompatibility), which are applied by spraying or brushing
3) Cold cured epoxy resin systems, as well as unsaturated polyester systems (SMC, BMC and gel coats)
4) Baking paint applied by curtain coater and dipping
5) Any other solvent based system where in-can transparency is not important likes colored and matted systems.
| Value | Units | Test Method / Conditions | |
| Denisty (at 20°C) | 0.78 - 0.82 | g/cm³ | — |
| Refractive Index | 1.420 - 1.430 | — | — |
| Flash Point | 31.0 | °C | — |
Packaging & Availability
- Packaging Information
20kg and 150kg non-returnable containers
Storage & Handling
- Shelf Life
- 5 years
- Storage Condition
AFCONA-2020 should be stored in a cool and dry place. When kept in an original unopened container, it will keep up for 5 years from the date of manufacture. The expiry date is indicated on the container.