Knowde Enhanced TDS
Identification & Functionality
- Carrier
- CASE Ingredients Functions
- Technologies
- Product Families
- Chemical Composition
Silicone free polymer
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
Applications & Uses
- Applications
- Application Method
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Cure Method
- Coating Type
- Incorporation
As a strong defoaming agent, AFCONA- 2024 is recommended to be incorporated prior during pre-mix. If added subsequently, good dispersion must be ensured.
- Addition and Dosage
0.1- 1.0% on total formulation. In general under normal conditions, the dosage is 0.20 – 0.50% based on total formulation.
Properties
- Physical Form
- Appearance
- Slight yellowish to transparent liquid
- Typical Properties
- Product Properties
AFCONA – 2024 is a unique defoamer. It has very strong defoaming and anti-foam performances with additional good leveling. This in contrary with most of the other defoamers, which influence the leveling performance negatively.
AFCONA-2024 is suitable for solvent- based coatings, printing inks and thermosetting resin systems. It eliminates foam and blistering, regardless whether the air bubbles are caused by the substrate. As mentioned, AFCONA-2024 has very strong defoaming as well as anti-foaming properties. In most cases, the de-aeration property is satisfactory. To improve further the de-aereation performance, a combination with silicone defoamers like: AFCONA-2023 or AFCONA- 2045 at 0.1-0.2% is recommended.
AFCONA-2024 is particularly suitable for the following applications:
1) Nitrocellulose lacquers and acid-cured wood finishes especially those applied by curtain coaters
2) Two-component polyurethane lacquers, except for high gloss clear (due to it high incompatibility), which are applied by spraying or brushing
3) Cold cured epoxy resin systems, as well as unsaturated polyester systems (SMC, BMC and gel coats)
4) Baking paint applied by curtain coater and dipping
5) Any other solvent based system where in-can transparency is not important likes colored and matted systems. Not suitable for air dry alkyd systems
Value | Units | Test Method / Conditions | |
Denisty (at 20°C) | 0.83 - 0.85 | g/cm³ | — |
Refractive Index | 1.430 - 1.440 | — | — |
Flash Point | 30.0 | °C | — |
Packaging & Availability
- Packaging Information
20 kg and 170 kg non-returnable containers
Storage & Handling
- Shelf Life
- 5 years
- Storage Condition
AFCONA - 2024 should be stored in a cool dry place. When kept in an original unopened container, it will keep up to 5 years from the date of manufacture. The expiry date is indicated on the container.