Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- PRODUCT BENEFITS
- Pump housings and pipe linings
- Fluid handling or chemical processing equipment
- Wet bench equipment
- Tanks
- Semiconductor wafer carriers
- Hostile environments involving chemical, thermal,
- and mechanical stress
- Food processing and packing equipment
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- TYPICAL APPLICATIONS
- Temperature range: -320°F to +500°F
- Exceptional dielectric insulation properties
- Negligible moisture absorption
- Low coefficient of friction
- Non-stick surface
- Very low gas permeation and outgassing
- May be welded with hot air welding equipment
- Chemically inert to all industrial chemicals
- and solvents
- High resistance to outdoor weathering
- Does not support combustion
- Low metals and ion extractables
Properties
- Flame Rating
- Physical Form
- Mechanical Properties
- Thermal Properties
- Electrical Properties
| Value | Units | Test Method / Conditions | |
| Melt Flow Rate | B:12-15, A:14-19, D:18-21 | g/10 min | D3307 |
| Durometer Hardness | 55 | Shore D | D2240 |
| Specific Gravity | 2.12 - 2.17 | g/cm3 | D792 |
| Water Absorption (24 hr.) | max. 0.03 | % | D570 |
| Tensile Strength (23°C) | 3600 | psi | D3307 |
| Elongation (23°C) | 300 | % | D3307 |
| Compressive Strength (23°C) | 2000 | psi | D695 |
| Flexural Modulus (23°C) | 85000 | psi | D790 |
| Value | Units | Test Method / Conditions | |
| Melting Point, Nominal | 302 - 310 | °C | D3418 |
| Thermal Expansion (21°C to 100°C) | 14 x 10^-5 | mm/mm/°C | D696 |
| Thermal Expansion (100°C to 149°C) | 17 x 10^-5 | mm/mm/°C | D696 |
| Thermal Expansion (149°C to 208°C) | 21 x 10^-5 | mm/mm/°C | D696 |
| Oxygen Index | min. 95 | % | D2863 |
| Maximum Service Temperature | 260 | °C | — |
| Value | Units | Test Method / Conditions | |
| Volume Resistivity | 10^18 | ohm-sq | D257 |
| Dielectric Strength Short Time (10 mil film) | 2000 | Volts/mil | D149 |
| Dielectric Constant (23°C, 60-10^6 Hz) | 2.03 | — | D150 |
| Dissipation Factor (23°C, 60-10^6 Hz) | 0.0001 | — | D150 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- COMPLIANCES
- USDA and FDA compliant CFR-177.1550 (Excluding PFA 350)
- 3A Sanitary Standard 20-17
Technical Details & Test Data
- MATERIAL CLASS
- ASTM D 3307 Type I (440HP) and ASTM D 3307 Type II (350 and 450HP)
- USP Class VI