Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- PRODUCT BENEFITS
- Negligible moisture absorption
- Low coefficient of friction
- Non-stick surfaces
- Chemically inert to most industrial chemicals and
- solvents
- Exceptional dielectric insulation properties
- High degree of stress crack resistance
- Very low gas permeation and outgassing
- Compatible with hot air welding equipment
- Temperature range: -400°F to +392°F
- High resistance to outdoor weathering
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- TYPICAL APPLICATIONS
- Pump housings and pipe linings
- Fluid handling or chemical processing equipment
- Semiconductor wet bench equipment
- Hostile environment involving chemical, thermal or
- mechanical stress
- Food processing and packaging equipment
- Medical components
Properties
- Flame Rating
- Physical Form
- Mechanical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Melt Flow Rate | 2 - 3.9 | g/10 min | D2216 |
Durometer Hardness | 55 - 56 | Shore D | D2240 |
Specific Gravity | 2.12-2.17 | g/cm3 | D792 |
Water Absorption (24 hr.) | max. 0.01 | % | D570 |
Tensile Strength (23°C) | 4350 | psi | D638 |
Ultimate Elongation (23°C) | 300 - 325 | % | D638 |
Impact Strength (23°C, Notched Izod) | No Break | J/m | D256 |
Flexural Modulus (23°C) | 95000 | psi | D790 |
Coefficient of Friction | 0.25 | — | D1894 |
Value | Units | Test Method / Conditions | |
Melting Point, Nominal | 255 - 260 | °C | D3418 |
Oxygen Index | min.95 | % | D2863 |
Continuous Service Temperature | 205 | °C | — |
Flammability | V-0 | — | UL 94 |
Value | Units | Test Method / Conditions | |
Surface Resistivity | 10^16 | ohm-sq | D257 |
Volume Resistivity | 10^18 | ohm-sq | D257 |
Dielectric Strength Short Time (10 mil film) | 2000 | Volts/mil | D149 |
Dielectric Constant (23°C, 10^3 Hz, Maximum) | 2.15 | — | D150 |
Dissipation Factor (23°C, 10^3 Hz, Maximum) | 0.0003 | — | D150 |
Arc Resistance | min. 180 | seconds | D495 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- COMPLIANCES
- USDA and FDA compliant per 21 CFR-177.1550
- 3A Sanitary Standard 20-17
Technical Details & Test Data
- MATERIAL CLASS
- ASTM D 2116 (Type I, II, III, or IV)
- USP Class VI