Knowde Enhanced TDS
Identification & Functionality
- HRAC/WSSA Group
- Agrochemical Functions
- Technologies
- Product Families
- Active
18.92% Quinclorac
- Active Ingredient
Dimethylamine salt of quinclorac; 3,7-dichlofo-8-quinolinecarbbxylic acid 18.92% OTHER INGREDIENTS 81.08% TOTAL 100.00% Equivalent to: 1.50 lbs quinclorac: 3,7-dichloro-8-quinolinecarboxylic acid equivalent per gallon.
Features & Benefits
- Post-Emergent Selective Herbicide
Selective control of crabgrass and other unwanted grassy weeds in established residential lawns, landscapes, parks, athletic fields, sod farms and more. Labeled for perennial rye, bermuda, zoysia, fescue and other labeled turf grasses.
- Product Highlights
QUIN KILL MAX herbicide may be applied post-emergence to residential and nonresidential turf grasses (refer to Table 1. Turf Tolerance (Established) for the control of many broadleaf and grass weeds. Examples of such sites include, but are not limited to:
- Grounds or lawns around residential and commercial establishments
- Multifamily dwellings
- Military and other institutions
- Parks
- Airports
- Roadsides
- Schools
- Picnic grounds
- Athletic fields
- Houses of worship
- Cemeteries
- Golf courses
- Sod farms
Applications & Uses
- Markets
- Applications
- Application Technique
- Herbicide Target Species
- Directions for Use
- It is a violation of federal law to use this product in a manner inconsistent with this labeling.
- For use only by certified commercial applicators or persons under their direct supervision and only for those uses covered by the certified applicator’s certification.
- All applicable directions, restrictions and precautions are to be followed. This labeling must be in the possession of the user at time of application.
- DO NOT apply this product by air or through any type of irrigation equipment. Albaugh, Inc. does not recommend or authorize the use of this product in manufacturing, processing or preparing custom blends with other products for application to turf.
- DO NOT apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the specified area during application.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Precautionary Statements
HAZARDS TO HUMANS AND DOMESTIC ANIMALS
CAUTION: Harmful if swallowed.PERSONAL PROTECTIVE EQUIPMENT (PPE)
Some materials that are chemically resistant to this product are listed below.
Applicators and other handlers must wear:- Chemical-resistant gloves, such as butyl rubber > 14 mils, or natural rubber > 14 mils, or neoprene rubber > 14 mils, or nitrile rubber > 14 milsLong-sleeved shirt and long pants
- Shoes plus socks
USER SAFETY RECOMMENDATIONS
Users should:- Wash hands with plenty of soap and water before eating, drinking, chewing gum, using tobacco, or using the toilet.
- Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
- Remove PPE immediately after handling this product.
ENVIRONMENTAL HAZARDS
- This chemical has properties and characteristics associated with chemicals detected in groundwater. The use of this chemical where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination.
- Keep out of lakes, ponds and streams. DO NOT apply directly to water, areas where surface water is present, or to intertidal areas below the mean high water mark. DO NOT contaminate water by cleaning of equipment or disposal of rinsate.
- DO NOT discharge effluent containing this product into lakes, streams, ponds, estuaries, oceans, or other waters unless in accordance with the requirements of a National Pollutant Discharge Elimination System (NPDES) permit and the permitting authority has been notified in writing prior to discharge.
- DO NOT discharge effluent containing this product into sewer systems without previously notifying the local sewage treatment plant authority. For guidance contact your State Water Board or Regional Office of the EPA.
ENGINEERING CONTROLS STATEMENT
When handlers use closed systems or enclosed cabs in a manner that meets the requirements listed in the Worker Protection Standard (WPS) for agricultural pesticides [40 CFR 170.240(d)(4-6)], the handler PPE requirements may be reduced or modified as specified in the WPS.
Packaging & Availability
- Available Sizes
- 12 x 1 qt
- 12 x 1 pt
Storage & Handling
- Storage and Disposal
DO NOT contaminate water, foodstuffs, feed or seed by storage or disposal.
PESTICIDE STORAGE: DO NOT store box under dampness or high humidity
PESTICIDE DISPOSAL: : Wastes resulting from the use of this product may be disposed of on-site or at an approved waste disposal facility.
CONTAINER DISPOSAL:
Nonrefillable container. Do not reuse or refill this container. Offer for recycling if available. Triple rinse or pressure rinse container (or equivalent) promptly after emptying; then offer for recycling, if available, or reconditioning, if appropriate, or puncture and dispose of in a sanitary landfill, or by incineration, or by other procedures approved by state and local authorities.
Triple rinse containers small enough to shake (capacity < 5 gallons) as follows: Empty the remaining contents into application equipment or a mix tank and drain for 10 seconds after the flow begins to drip. Fill the container 1/4 full with water and recap. Shake for 10 seconds. Pour rinsate into application equipment or a mix tank, or store rinsate for later use or disposal. Drain for 10 seconds after the flow begins to drip. Repeat this procedure two more times. Triple rinse containers too large to shake (capacity > 5 gallons) as follows: Empty the remaining contents into application equipment or a mix tank. Fill the container 1/4 full with water. Replace and tighten closures. Tip container on its side and roll it back and forth, ensuring at least one complete revolution, for 30 seconds. Stand the container on its end and tip it back and forth several times. Empty the rinsate into application equipment or a mix tank, or store rinsate for later use or disposal. Repeat this procedure two more times.
Pressure rinse as follows: Empty the remaining contents into application equipment or mix tank and continue to drain for 10 econds after the flow begins to drip. Hold container upside down over application equipment or mix tank, or collect rinsate for later use or disposal. Insert pressure rinsing nozzle in the side of the container and rinse at about 40 PSI for at least 30 seconds. Drain for 10 seconds after the flow begins to drip.