Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Characteristics
Ultra Truck is primarily developed to meet the highest requirements for extended replacement intervals where the quality level ACEA E9, E6, E7 or E4 is required. The unique additive technology with low levels of sulfate ash, sulfur and phosphorus provides significantly longer service life than conventional oils for the exhaust gas purification systems used to meet Euro VI emissions requirements. This in combination with fully synthetic base oil gives the product very high quality. Ultra Truck keeps the engine clean and counteracts wear in the engine.
Applications & Uses
- Markets
- Applications
- Application Area
- Recommendations
Ultra Truck is especially recommended for engines with exhaust gas systems according to Euro VI where an oil that complies with ACEA E9. It can also be used to advantage for heavier vehicles with supercharged diesel engines that work under harsh conditions or run with extended, oil change intervals according to ACEA E9, E6, E7, E4 and API CJ-4.
Recommended for SAE 5W-30 ACEA E6/E9 API CJ-4/CI-4+ Volvo VDS-4 Cummins 20081 Deutz DQC-IV-10 LA MAN 3477, 3677 Mercedes Benz MB 228.51 Scania Low Ash/LDF 4
Properties
- SAE Viscosity Grade
- Technical Data
| Value | Units | Test Method / Conditions | |
| Bastal (TBN) | 12.9 | mg KOH/g | — |
| Density (15°C) | 855.0 | kg/m3 | — |
| Flash Point | 214.0 | °C | — |
| Lowest Flow Temperature | -45.0 | °C | — |
| Sulfate Ash Content | 1.0 | % | — |
| Viscosity (100°C) | 12.2 | mm2/s | — |
| Viscosity (40°C) | 70.4 | mm2/s | — |
| Viscosity Index | 167.0 | — | — |