Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Foam Type
- Product Type
- Basis
- Polyurethane Prepolymer
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
- Excellent adhesion & filling capacity and high thermal & acoustical insulation value.
- Low expansion, low pressure rates.
- Adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon, silicone and surfaces contaminated with oils and greases, mold release agents and similar materials.
- Mold-proof, water-proof, over paintable.
- Cured foam dries rigid and can be trimmed, shaped and sanded.
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Cure Method
- Applications
- Fixing and insulating of door and window frames.
- Filling and sealing gaps, joints and cavities.
- Filling of penetrations in walls.
- Insulating electrical outlets and water pipes.
- Instructions
- Optimal can temperature is 20°C. Application (ambient) temperature is between -5°C to 30°C.
- Shake the can well before use. Screw the adapter on the valve.
- Hold the can upside down and activate the foam by pressing the valve.
- Moisturizing the surfaces and the foam improves adhesion and shortens curing time.
- Fresh foam can be cleaned by Akfix Foam Cleaner. Cured foam can be cleaned barely mechanically.
- Restrictions
- Storage above 25°C and below 5°C shortens shelf life.
- Should be stored and transported in vertical position.
- Should be kept in room temperature for at least 12 hours before the application.
- Cured foam will discolor if exposed to ultraviolet light.
- Paint or coat the cured foam for best results in outdoor applications.
- Lower temperatures decrease yield and curing time.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Curing System | Moisture Cure | — | — |
Specific Gravity | 19 - 25 | kg/m³ | ASTM D1622 |
Tack-Free Time (1cm Width) | 5.0 - 9.0 | min | ASTM C1620 |
Cutting Time (1cm Width) | 20 - 45 | min | ASTM C1620 |
Cure-Time | 24.0 | hours | — |
Foam Colour | Light Yellow | — | — |
Yield | 30 - 45 | L | ASTM C1536 |
Fire Class of the Cured Foam | B3 | — | DIN 4102-1 |
Thermal Conductivity (20°C) | 0.036 | W/m.k | DIN 52612 |
Compression Strength | 0.03 | MPa | DIN 53421 |
Water Penetration | 0.0 | — | ISO 2896-87 |
Water Absorption | max.1 | vol% | DIN 53428 |
Temperature Resistance | -40 to 80 | °C | — |
Application Temperature | 5.0 - 30 | °C | — |
Regulatory & Compliance
- Standards
Meets or exceeds the requirements of the following specifications:
- The French VOC requirements for class A+
- UL listed
- The requirements of VOC content specifications in LEED credit EQc4.1 “Low-emitting products” of SCAQMD rule 1168.
Safety & Health
- Safety
- Contains Diphenylmethane-4, 4’-Diisocyanate.
- Harmful by inhalation. Irritating to eyes, respiratory system and skin. Do not breathe spray/vapor.
- Wear suitable protective clothing and gloves. Use only in well-ventilated areas.
- Pressurized container. Keep away from direct sunlight and do not expose temperatures over 50°C.
- Do not pierce or burn, even after use.
- Keep away from sources of ignition, no smoking.
- Keep out of the reach of children.
Packaging & Availability
- Packaging
Stock Code Product Code Volume Box Qty FA021 806 Gw. 850 gr 12
Storage & Handling
- Storage & Shelf Life
12 months if stored properly.