Products

Akron Coating and Adhesives ACA-20-649 is a pressure sensitive adhesive composed primarily of synthetic polymers and avoids natural rubber latex. The polymer is crosslinked to enhance chemical and heat resistance. Heat and perspiration do not affect its high tack and shear resistance. A 1 mil dry adhesive film is recommended as a starting point for testing. Rough topography such as fabrics may require greater adhesive thickness.

Akron Coating and Adhesives ACA-30-101 is waterborne dispersions of heat activated adhesives formulated to be used with a variety of grades of TPO/TPE materials. ACA 30-101 is for the softer grades of TPO/TPE, and has the lowest melting point.

Akron Coating and Adhesives ACA-20-658 is a high peel adhesion, high shear resistance and high tack heat stabilized and heat resistant rubber-resin type pressure sensitive adhesive. Its cross-linking capability can be used to further enhance heat resistance. All components of ACA 20-658 conform to the requirements of 21CFR 175.105 FDA.

Akron Coating and Adhesives ACA-30-016 is a heat activated latent cure waterborne adhesive. The adhesive will work with plastic over-molding or extrusion onto the metal. Pre-heating metal components to 200°F may be necessary in injection molding applications. The adhesive is unique in that it has a latent cure mechanism that cures the adhesive during heat activation providing salt-water and solvent resistance.

Akron Coating and Adhesives ACA-30-100 is a waterborne blend of epoxy and polyurethane resins containing adhesion promoters. The system contains no crosslinkers when shipped. A crosslinker may be added to further enhance hot strength and solvent resistance, after which the product will have a 3 day pot life. Contact ACA regarding use of the crosslinker.