Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- HRAC/WSSA Group
- Agrochemical Functions
- Technologies
- Product Families
- Composition
ACTIVE INGREDIENTS:
Clopyralid MEA salt: 3,6-dichloro-2-pyridinecarboxylic acid, monoethanolamine salt - 5.1%
2,4-dichlorophenoxyacetic acid, triisopropanolamine salt* - 39.0%
INERT INGREDIENTS - 55.9%
“Isomer Specific by ACAC Method No. 978.05 (15th Ed.)
Features & Benefits
- Labeling Claims
- Product Features
Provides control of broadleaf weeds such as Canada thistle, common cocklebur, volunteer sunflower and many other problem weeds with minimal concerns for volatilization, drift or crop injury.
Applications & Uses
- Markets
- Applications
- Applicable Crop
- Application Technique
- Herbicide Target Species
- Directions for use
It is a violation of Federal law to use this product in a manner inconsistent with its labeling. Read all Directions for Use carefully before applying. Sale and use of this product in Suffolk and Nassau counties in the state of New York is prohibited. Use of this product in the state of New York is limited to postemergence application with a maximum use of 7.84 fl oz (0.062 Ib of clopyralid) per acre per year; and providing that no other product containing clopyralid has been applied pre-plant or post-plant. Use of this product in Oregon is limited to the sites stated on this label which are agricultural only. Use of this product in certain portions of California, Oregon, and Washington is subject to the January 22, 2004 Order for injunctive relief in Washington Toxics Coalition, et. Al. v. EP, CO1-0132C, (W.D. WA). Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your state or tribe, consult the agency responsible for pesticide regulation.
Properties
- Formulation Type
- Physical Form
Regulatory & Compliance
- Chemical Inventories
Safety & Health
- Precautionary Statements
DANGER! Corrosive. Causes Irreversible Eye Damage. Harmful If Absorbed Through Skin or Inhaled. Harmful if Swallowed. Do not get in eyes, on skin, or on clothing. Avoid breathing spray mist.
- Personal Protective Eqiupment
Some materials that are chemical-resistant to this product are butyl rubber, natural rubber, neoprene or nitrile rubber. If you want more options, follow the instructions for Category A on an EPA chemical-resistance category selection chart.
All mixers, loaders, applicators, flaggers, and other handlers must wear: .
- Long-sleeved shirt and long pants.
- Shoes and socks.
- Chemical-resistant gloves
- Protective eyewear.
- Chemical-resistant apron when applying with any handheld nozzle or equipment, mixing or loading, cleaning up spills or equipment, or otherwise exposed to the concentrate.
- User Safety Recommendations
Users should:
- Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet.
- Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing.
- Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.
- Environmental Hazards
This pesticide may be toxic to fish and aquatic invertebrates. Do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark. Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated areas. Do not contaminate water when disposing of equipment washwaters or rinsate. Apply this product only as directed on label. This chemical has properties and characteristics associated with chemicals detected in groundwater. The use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Application around a cistern or well may result in contamination of drinking water or groundwater. Clopyralid is a chemical which can travel (seep or leach) through soil and under certain conditions contaminate groundwater which may be used for irrigation or drinking purposes. Users are advised not to apply clopyralid where soils have a rapid to very rapid permeability throughout the profile (such as loamy sand to sana) and the water table of an underlying aquifer is shallow, or to soils that would allow direct introduction into an aquifer. Your local agricultural agencies can provide further information on the type of soil in your area and the location of groundwater.
Packaging & Availability
- Packaging Type
Storage & Handling
- Storage and Disposal
Do not contaminate water, food or feed by storage or disposal.
PESTICIDE STORAGE: Store above 40°F or warm and agitate before use.
PESTICIDE DISPOSAL: Pesticide wastes are acutely hazardous. Improper disposal of excess pesticide, spray mixture, or rinsate is a violation of Federal law. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for guidance.