company tower banner
Albaugh Company Logo
Range Star® is a selective postemergence herbicide for controlling a wide spectrum of annual, biennial, and perennial broadleaf weeds and brush in grass forages and selected row crops. Range Star® may be used in/on Conservation Reserve Program (CRP) land, fallow systems (between crop applications), general farmsteads, grain sorghum, grass (hay and silage), pastures, rangeland, sugarcane, and wheat.

Functions: Herbicide

Herbicide Target Species: Broadleafs, Grasses

HRAC/WSSA Group: 4

Application Technique: Chemigation, Ground Soil Applied, Post-Emergence, Sprayers

Formulation Type: Concentrate Solutions

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

HRAC/WSSA Group
Agrochemical Functions
Technologies
Composition

ACTIVE INGREDIENTS:

Dimethylamine salt of dicamba (3,6-dichloro-o-anisic acid)* - 12.4%

Dimethylamine salt of 2,4dichlorophenoxyacetic acid** - 35.7%

OTHER INGREDIENTS - 51.9%

*This product contains 10.3% 3,6-dichloro-o-anisic acid (dicamba) or 1 pound per gallon (120 g/L)

**This product contains 29.6% 2,4-dichlorophenoxyacetic acid (2,4-D) or 2.87 pounds per gallon (344 g/L).

Features & Benefits

Product Features

Post applied for control of broadleaf weeds.

Applications & Uses

Herbicide Target Species
Directions for use

It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Do not apply this product in a way that will contact workers or other persons, either directly or through drift. Only protected handlers may be in the area during application. For any requirements specific to your State or Tribe, consult the agency responsible for pesticide regulation. Do not apply this product through any type of irrigation system. Use of this product in certain portions of California, Oregon and Washington is subject to the January 22, 2004 Order for injunctive relief in Washington Toxics Coalition, et_al. v. EPA, C01-0132C, (W.D. WA). For further information, please refer to EPA Web Site: http:/Avww.epa.gov/espp.

Properties

Formulation Type
Physical Form

Safety & Health

Precautionary Statements

Corrosive. Causes irreversible eye damage. Do not get in eyes or on clothing. Harmful if swallowed or absorbed through skin. Avoid contact with skin.

Personal Protective Eqiupment

All mixers, loaders, applicators, flaggers, and other handlers must wear:

1. Long-sleeved shirt and long pants.

2. Shoes and socks.

3. Chemical resistant gloves (except for applicators using groundboom equipment, pilots, and flaggers) made of barrier laminate, butyl rubber >= 14 mils, nitrile rubber >= 14 mils, neoprene rubber >= 14 mils, natural rubber >= 14 mils, polyethylene, polyvinyl chloride (PVC) >= 14 mils, or viton >= 14 mils.

4. Chemical resistant apron when applying with any handheld nozzle or equipment, mixing or loading, cleaning up spills or equipment, or otherwise exposed to the concentrate.

5. Wear protective eyewear (goggles or face shield).

User Safety Recommendations

Users should:

1. Wash hands after handing and before eating, drinking, chewing gum, using tobacco or using the toilet.

2. Remove clothing/PPE immediately if pesticide gets inside. Then wash thoroughly and put on clean clothing. If pesticide gets on skin, wash immediately with soap and water.

3. Remove PPE immediately after handling this product. Wash the outside of gloves before removing. As soon as possible, wash thoroughly and change into clean clothing.

Environmental Hazards

This pesticide is toxic to fish and aquatic invertebrates. Do not apply directly to water, or to areas where surface water is present, or to intertidal areas below the mean high water mark. Drift and runoff may be hazardous to aquatic organisms in water adjacent to treated areas. Do not contaminate water when disposing of equipment washwaters or rinsate. Apply this product only as directed on label. This chemical has properties and characteristics associated with chemicals detected in groundwater. The use of this chemical in areas where soils are permeable, particularly where the water table is shallow, may result in groundwater contamination. Application around a cistern or well may result in contamination of drinking water or groundwater. Most cases of groundwater contamination involving phenoxy herbicides such as 2,4-D have been associated with mixing/loading and disposal sites. Caution must be exercised when handling 2,4-D pesticides at such sites to prevent contamination of groundwater supplies. Use of closed systems for mixing or transferring this pesticide will reduce the probability of spills. Placement of the mixing/loading equipment on an impervious pad to contain spills will help prevent groundwater contamination.

Packaging & Availability

Packaging Type

Storage & Handling

Storage and Disposal

Do not contaminate water, food or feed by storage or disposal.

PESTICIDE STORAGE: Store in original container in a well-ventilated area separately from fertilizer, feed and foodstuffs. Avoid crosscontamination with other pesticides. Spillage or leakage should be contained and absorbed with clay granules, sawdust, or equivalent material for disposal.

PESTICIDE DISPOSAL: Pesticide wastes are toxic. Triple rinse pesticide from containers and use rinsates in the pesticide application. Improper disposal of excess pesticide, spray mixture, or rinsate, is a violation of Federal Law and may contaminate groundwater. If these wastes cannot be disposed of by use according to label instructions, contact your State Pesticide or Environmental Control Agency, or the Hazardous Waste representative at the nearest EPA Regional Office for guidance.