Knowde Enhanced TDS
Identification & Functionality
- Base Oil Type
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- ALFA TG-106 thermal compound resists changes in consistency temperatures up to 180°C; function as heat transfer media, durable dielectric insulation, barrier against environmental contaminants and as a stress-relieving shock and vibration absorber over a wide temperature and humidity range.
- TG-106 thermal paste is resistant to ozone and ultraviolet degradation and has good chemical and solvent stability, good interference between the heat producing device and the heat transfer media, and low surface tension that enables them to wet most surfaces.
- ALFA TG-106 will not harden, dry, or melt after 1200 hours @ 205°C.
- Features & Benefits
- Non-Sag or flowing
- Non-Hazardous polymerization
- Non-Toxic
- Non-Corrosive
- Reworkable
- Easily removed
- Non-Flammable
- Easy to apply via dispensing or screen printing
- Low surface tension that enables it to wet most surfaces, which can lower the thermal contact resistance between the substrate and material.
Applications & Uses
- Markets
- Applications
- Application Area
- Application Method
- Potential Uses
- Effective thermal coupler for any heat sink device, CPU to heat sink
- Automotive temperature-sensing devices
- Temperature sensors
- Applied to the base and mounting studs of transistor, diodes and silicone controlled rectifiers
- Power transistors
- Diodes, semiconductors
- Thermal Joints
- For any device where efficient cooling is required
- Potting
- TEC Modules
- Hardware
- Telecommunications
- Right product for thermal management
- High-voltage corona suppressant in connectors for fly back transferors located in TV sets.
- Application Methods
Automated or manual dispensing.
- Usage Instructions
For industrial use only.
- Limitations
TG-106 is neither tested nor represented as suitable for medical or pharmaceutical use.
Properties
- Filler Content
- Metal Oxide
- Base Fluid
- Dimethyl Polysiloxane
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Bleed (24 Hours) | 0.6 | % | — |
| Dielectric Constant (100Hz) | 4.39 | — | ASTM D150 |
| Dielectric Strength | 380 | volts/mil | ASTM D150 |
| Dissipation Factor (100Hz) | 0.0022 | — | ASTM D150 |
| Evaporation (24 hrs, 25°C) | 0 | % | — |
| Evaporation (200°C, 24H By Weight) | 0.5 | % | — |
| Press Flow (42.5 PSI, 25°C) | 20 | sec | — |
| Specific Gravity (25°C) | 2.7 | — | — |
| Volume Resistivity | 3.0 x 10¹⁴ | ohm-cm | ASTM D257 |
| Viscosity | Paste | — | — |
| Penetration (Worked) | 285.1 | mm | — |
| Thermal Conductivity | 1.65 | W/m-K | — |
| Operating Temperature Range | -60 - 205 | °C | — |
Safety & Health
- Environmental Impact Data
ODP None HCFC None VOC None HFC None
Packaging & Availability
- Availability & Packaging
1) Squeeze tubes * 0.5 oz --- 1 oz --- 2 oz --- 5.3 oz --- *Minimum of 12 tubes per order. 2) Syringes 2 gm --- 4 gm --- 6 gm --- 10 gm --- 3) Other Size Code Container Size A 2oz Jar B 5oz Tube C 8oz Jar D 1 pint Can E 10 lb. Can F 60 lb. Pail
Storage & Handling
- Storage Handling & Shelf Life
TG-106 has a shelf life of 5 years at room temperature (76°F) in an unopened container, settlings may occur during long term storage, it is recommended to re-mix the filler by hand or mechanical mixing. Keep container tightly closed store in cool area away from ignition sources and oxidizers, no special precautions need to be taken if product is handled according to directions. Shelf life is indicated on the product label, any special storage and handling instructions will be printed on the product container label.
- Clean Up and Disposal
TG-106 can be removed by using solvents such as mineral spirit, heptane, or isopropyl alcohol. Dispose of in accordance with local, state and federal regulations for hazardous waste.