brand
brand
CYCAT Wetting And Dispersing Additives
Search in
15 records found on Knowde
PRODUCT

CYCAT

CYCAT® 4107 Catalyst

CYCAT® 4107 Catalyst is an amine-blocked p-toluene sulfonic acid (PTSA) in isopropanol. It is recommended for applications where a wrinkled or textured finish is desired with thermoset coatings crosslinked with highly alkylated amino resins, like CYMEL® 303 LF.

PRODUCT

CYCAT

CYCAT® 6325

CYCAT 6325 catalyst is an amine-blocked dodecylbenzene sulfonic acid supplied in isopropanol and 2-butoxyethanol. It is recommended to accelerate the cure of amino crosslinking agents and provide improved formulated package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst, however, package stability with an unblocked catalyst will be poor.

PRODUCT

CYCAT

CYCAT® 600A

CYCAT® 600A catalyst is an organic acid catalyst recommended to accelerate the crosslinking reaction of amino resins with polymers containing hydroxyl, carboxyl, or amide functionality. CYCAT® 600A is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as para-toluene sulfonic acid, in low alcohol-containing formulations. For formulation of 1K systems, CYCAT® 600A should be blocked with an appropriate amine, such as AMP (2-amino-2-methyl-1-propanol). CYCAT 600A catalyst is FDA approved under section CFR 175.300.

PRODUCT

CYCAT

CYCAT® 6051

CYCAT 6051 is an extremely hydrophobic acid catalyst based on dinonylnaphthalene sulfonic acid supplied at 50% active in n-butanol. It is an oil soluble sulfonic acid that gives excellent humidity resistance in high bake amino and phenolic systems.

PRODUCT

CYCAT

CYCAT® 6925

CYCAT 6925 catalyst is amine-neutralized dodecylbenzene sulfonic acid. It is compliant with FDA 21 CFR Section 175.300 concerning chemicals for use in resinous and polymeric coatings.

PRODUCT

CYCAT

CYCAT® VXK 6364

Cycat VXK 6364 is a catalyst which is suitable to accelerate the cure of fully alkylated melamine formaldehyde resins. Post curing of films containing Cycat VXK 6364 can occur.

PRODUCT

CYCAT

CYCAT® 4040

CYCAT® 4040 Catalyst is a very versatile catalyst material especially formulated for consistency of strength for use in various solvent soluble and water-based thermosetting vehicles. It is especially recommended where a strong acid catalyst is desired to accelerate the cure of highly alkylated melamine-formaldehyde crosslinked systems and to reduce the curing temperature of urea resin systems.

PRODUCT

CYCAT

CYCAT® 6020

CYCAT 6020 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst, however, package stability with an unblocked catalyst will be poor.

PRODUCT

CYCAT

CYCAT® 6030

CYCAT 6030 catalyst is an amine-neutralized dodecylbenzene sulfonic acid supplied in isopropanol. It is recommended for use as a catalyst to accelerate the cure of amino crosslinking agents and provide improved package stability. As a general rule, systems which employ a blocked catalyst will have a decreased rate of cure compared to those containing an unblocked catalyst; however, package stability with an unblocked catalyst will be poor.

PRODUCT

CYCAT

CYCAT® 600 Catalyst

CYCAT® 600 Catalyst is a liquid, organic acid catalyst recommended to accelerate crosslinking of amino resins with polymers containing hydroxyl, carboxyl or amide functionality. CYCAT® 600 Catalyst is soluble in aliphatic and aromatic hydrocarbons, esters, ketones, alcohols, glycol ethers and water. It may be used as a replacement for less soluble acid catalysts, such as toluene sulfonic acid, in low alcohol-containing finishes.

PRODUCT

CYCAT

CYCAT® 4045 Catalyst

CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH.

PRODUCT

CYCAT

CYCAT® 500 Catalyst

CYCAT® 500 Catalyst is a strong sulfonic acid catalyst. It is recommended for use in electrocoating applications to achieve cures in the range of 110 - 135 °C in 15 to 30 minutes, or to reduce the baking time at higher baking temperatures. This product is also recommended for coatings applied by other application techniques, providing improved adhesion and resistance properties compared with other sulfonic acid type catalysts.

PRODUCT

CYCAT

CYCAT® XK 406 N

Cycat® XK 406 N is a light to dark reddish coloured, low viscous liquid, phosphoric acid derivate. It increases the crosslinking speed of heat curing coating systems based on phenolic/-epoxide resin combinations. A significant improvement of adhesion properties is often seen in connection with the use of this product; furthermore, the use of Cycat® XK 406 N often leads to an improved sulphur staining resistance of interior can coating systems.

PRODUCT

CYCAT

CYCAT® 296-9 Catalyst

CYCAT® 296-9 Catalyst is an unique, clear liquid, acid catalyst developed to accelerate the cure of Cymel amino resins at normal baking temperatures, and to permit the cure of clear finishes and enamels within relatively low temperature ranges. Coatings containing CYCAT® 296-9 catalyst, may be cured on low temperature bake schedules to the same hardness as similar uncatalyzed systems which require higher temperatures. Since the corrosion resistance of finishes containing high levels of catalyst may be lessened, the resistance properties should be carefully checked.

PRODUCT

CYCAT

CYCAT® VXK 6395

CYCAT® VXK 6395 is an amino blocked acidic catalyst. It was developed for cross-linking reaction of urea and melamine curing systems at low temperatures. Typical application areas are stoving paint systems for general industry and for OEM automotive systems.