Knowde Enhanced TDS
Identification & Functionality
- Chemical Name
- CASE Ingredients Functions
- CAS No.
- 57472-68-1
- EC No.
- 260-754-3
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Performance Highlights
DPGDA is characterized by:
- Low viscosity
- Good diluency
- Light color
UV/EB curable formulated products containing DPGDA are characterized by:
- Improved flexibility
- Good cure response
- Improved adhesion on plastics, wood, and some metals
The actual properties of UV/EB cured products also depend on the selection of other formulation components such as oligomers, additives and photoinitiators.
Applications & Uses
- Applications
- Ink & Toner Type
- Recommended Uses & Known Applications
DPGDA is recommended as a reactive diluent for UV/EB cured inks and coatings where improved adhesion or increased flexibility are desired, such as:
- Wood coatings
- Coatings and inks for flexible and rigid plastics
Properties
- Appearance
- Clear
- Physical Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density (25°C) | 1.06 | g/ml | — |
| Flash Point | min. 100 | °C | — |
| Formula Weight | 242 | — | — |
| Melting Point | max. 0 | °C | — |
| Vapor Pressure at 20°C | max. 0.03 | mm Hg | — |
| Value | Units | Test Method / Conditions | |
| Viscosity (25°C) | 42125 | cP/mPa·s | — |
| Water Content | max. 0.1 | % | — |
| Acid Value | max. 0.4 | mg KOH/g | — |
| Color ( Pt-Co scale) | max. 60 | — | — |
| Residual Solvent Content | max. 0.09 | % | — |
Safety & Health
- Precautions
Before using DPGDA, see the Safety Data Sheet (SDS) for information on the identified hazards of the material and the recommended personal protective equipment and procedures.
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage and Handling
Care should be taken not to expose the product to high temperature conditions, direct sunlight, ignition sources, oxidizing agents, alkalis or acids. This might cause uncontrollable polymerization of the product with the generation of heat. Storage and handling should be in stainless steel, amber glass, amber polyethylene or baked phenolic lined containers. Procedures that remove or displace oxygen from the material should be avoided. Do not store this material under an oxygen free atmosphere. Dry air is recommended to displace material removed from the container. Wash thoroughly after handling. Keep container tightly closed. Use with adequate ventilation.
See the SDS for the recommended storage temperature range for DPGDA.