Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Key Information
- Excellent tack
- Good aging properties and resistant to water and plasticiser migration
- Easy and safe to use
- Environmentally friendly
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Typical Applications
Alpha A318 Acrylic Adhesive is suitable for the following applications:
- Pressure sensitive adhesive applications
- Manufacture of self adhesive labels
- Bonds well to PVC (plasticised or unplasticised), Polyester and Polyolefins
- Handling & Applications
The general application information presented here is based upon typical conditions determined by Alpha Adhesives & Sealants testing. Our recommendations on the use of this product are based on methods believed to be reliable. It is advised that users conduct their own tests to determine the suitability of the product for their specific application.
Surface Preparation
All substrates must be clean of any dust, grit, loose material, wax, grease and oil. Irregularities in the surfaces to be bonded should be smooth to present the flattest possible surface for bonding.
Adhesive Application
The following application method should only be used as a guideline. It is advised that the user conducts preliminary tests to ensure they are using the adhesive correctly for their own purpose.
- Stir adhesive before use.
- Using a brush and spreader, apply an even coating of adhesive to one of the surfaces that is to be bonded.
- Allow the adhesive to dry to a clear appearance before bonding the materials (touch dry). The time for this drying will depend on the temperature and humidity. Alpha A318 can be dried at 70°C, reducing the open joint time accordingly.
- Bond the materials under firm, even pressure across the total bonded area.
- Allow the final coat to achieve a touch dry state. Assemble the bond and consolidate with pressure to assure a good contact across the bond line. The use of a nip-roller is preferred for ensuring optimum contact is achieved across the bonded area.
Curing
Bonded assemblies should not be moved during curing of the adhesive. The immediate high contact bond strength increases appreciably within the next 48 hours and will develop still further in service. For the best performance, leave at room temperature for 7 days.
Cleaning
For wet adhesive: warm soapy water should be used. For dried adhesive: Cleaner T559 TF should be used to remove residues from surfaces.
Properties
- Physical Form
- Base
- Acrylic
- Consistency
- Liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Specific Gravity (20°C, 60% RH) | 1.02 | - | - |
| Total Solids Content | 52.5 - 55.5 | % | - |
| Viscosity (20°C, 60% RH) | 11,000 - 14,000 | cP | - |
| Open Joint Time | 10 - 30 | hours | - |
| Cure Time | 7.0 | Days | - |
| Application Temperature | 15 - 35 | °C | - |
| Coverage | 3.5 - 4.5 | tyres / litre | - |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Product Performance
The performance data presented here has been determined by Alpha Adhesives & Sealants standard test methods and are average values that should not be used for specification purposes. Our recommendations on the use of this product are based on tests believed to be reliable. It is advised that users conduct their own tests to determine the suitability of the product for their specific application.
Test Substrates Results/Observations
180° Peel Adhesion Test Leather Cloth to Wood 15 N/50mm
Safety & Health
- Health & Safety Information
Alpha A318 Acrylic Adhesive is classified as non-hazardous according to Directive EC 1272/2008. Please refer to the Alpha A318 Acrylic Adhesive Safety Data Sheet for further health & safety information.
Packaging & Availability
- Packaging Type
- Product Availability
Product Reference Pack Size Container Box Quantity A318 25 L Bucket N/A A318 205 L Drum N/A
Storage & Handling
- Storage
Alpha A318 Acrylic Adhesive should be stored in its original container, with the lid tightly secured, in dry conditions and at temperatures between 5°C and 25°C. Alpha A318 Acrylic Adhesive will keep satisfactorily for up to 18 months from date of manufacture if stored according to the recommended conditions.