Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Cure Method
- Plastics & Elastomers End Uses
Properties
- Color
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Compression (Set, Maximum 1) | 25.0 | % | ASTM D-412 |
Continuous Operating Temperature | 300.0 | — | — |
Cure System | Peroxide | — | — |
Elastomer Specification | M6CH610A25B14 | — | ASTM D-2000 |
Elongation | min. 300 | % | ASTM D-412 |
Elongation | min. -30 | % | ASTM D-573 |
Gas Ply Thickness | min. 0.062 | inches | — |
Hardness Durometer | 60 (+/- 5) | Shore A | ASTM D-2240 |
Hardness, Durometer Change | 0 - 10 | Shore A | ASTM D-573 |
Intermittent Operating Temperature, | 350.0 | °F | — |
Outer Ply Thickness | min. 0.062 | inches | — |
Reinforcement Fabric | Plain Weave Aramid/Fiberglass | — | — |
Specific Gravity | 1.12 (+/- 0.03) | g/cm3 | ASTM D-297 |
Tensile Strength | min. 1450 | PSI | ASTM D-412 |
Tensile Strength (Weft) | 110.0 | lbs/inch | — |
Tensile Strength, (Change) | max. -20 | % | ASTM D-573 |
Tensile Strength, (Warp) | 250.0 | lbs/inch | — |
Thickness | 0.125 (+/- 0.015) | inches | — |
Weight | 6.5 (+/- 0.5) | lb/sqyd | — |
Weight | 104 (+/- 6) | ozs/sqyd | — |
Weight, (Change) | approx. 10 | % | ASTM D-573 |
Width, (*applies to roll goods) | 48 (+/- 0.5) | — | — |