Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Features
- 100% Virgin FEP
- Excellent UV transmission
- Low permeability
- High thermal stability
- Excellent clarity
- Moisture absorption nearly zero
- Does not impart taste, odor or contaminants
- Non-flammable
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Applications
- Ground water monitoring.
- Air sampling.
- Laboratory applications.
- Water process.
- UV water purification systems.
Properties
- Physical Form
- Physical Properties
- Specifications
- General: FEP meets the requirements listed in ASTM D2116.
- Temperature: -100°F to 400°F.
- Flammability: FEP is non-combustible and does not promote flame spread.
Value | Units | Test Method / Conditions | |
Upper Service Temperature Long Term | 400.0 | °F | - |
Specific Gravity | 2.12 - 2.17 | - | D 792 |
Tensile Strength | 3500.0 | PSI | D 1708 |
Elongation | 300 - 400 | % | D 638 |
Flex Modulus | 90000.0 | PSI | D 790 |
MIT Flex Life | 5000.0 | - | D 2176 |
Hardness | 57 - 60 | Shore D | D 2240 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Technical Details
ALTAFLUOR® 2E0 FEP ENVIRO - Enviro Tubing
PART NUMBER
ID
OD
±
WALL
±
2E0-0250-030-XX 44636 44565 0.005 0.03 0.003 2E0-0313-030-XX 44565 44697 0.005 0.03 0.003 2E0-0375-030-XX 44697 44628 0.005 0.03 0.003 2E0-0500-030-XX 44758 44563 0.005 0.03 0.003 2E0-0250-040-XX 0.17 44565 0.005 0.04 0.003 2E0-0375-062-XX 44565 44628 0.005 0.062 0.003 2E0-0500-062-XX 44628 44563 0.005 0.062 0.003 Additional sizes up to 4” OD are available as custom extrusions - minimum order requirements may apply. Please contact Altaflo office for details. This tubing is not recommended for aggressive chemical applications - please refer to ALTAFLUOR® 200 or ALTAFLUOR® 400.
ALTAFLUOR® 2E0 FEP ENVIRO - Bend Radius And Working Pressure Chart
PART NUMBER
OD
WALL
ID
BEND RADIUS
WORKING PRESSURE @ 73°F
2E0-0250-030-XX 0.25 0.03 0.188 1” 195 2E0-0313-030-XX 0.313 0.03 0.25 1-3/4” 156 2E0-0375-030-XX 0.375 0.03 0.313 2-1/2” 130 2E0-0500-030-XX 0.5 0.03 0.438 6” 97 2E0-0250-040-XX 0.25 0.04 0.17 1” 260 2E0-0375-062-XX 0.375 0.062 0.25 1” 269 2E0-0500-062-XX 0.5 0.062 0.375 2” 200 The above information is based on tests performed at 73° F and can vary in individual applications based on parameters such as temperature, chemical concentration, pressure, etc. Please consult factory for details. For an estimate on burst pressure at ambient temperature we consider a 3:1 ratio when exposure temperature is 73° F. However Altaflo does not recommend exceeding the suggested Working Pressure listed.