Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Overview
- IntegraSqueeze Resin is a pumpable, control-set liquid capable of creating a permanent, impermeable seal in downhole remedial applications and well abandonment services.
- Minor leaks sometimes occur in wellbore tubulars, stage collars, downhole plugs and casing annuli. These are usually manifested by annular pressure buildup or loss of well integrity.
- These are usually manifested by annular pressure buildup or loss of well integrity.
- Traditionally, well repair has been attempted by squeezing conventional Portland cements, with limited success in many cases. Portland cement slurry contains a large fraction of solids which cannot penetrate and seal smaller orifices and porous media.
- IntegraSqueeze Resin is a low-viscosity liquid with controlled set characteristics. Pressure is applied to liquid resin to penetrate split, cracked or corroded tubulars, slots, porous media and other orifices. When set, resin creates a pressure-tight seal.
- The superior compressive, tensile and bond strength of set resins, along with the elasticity of the material, further enhance resin’s sealing properties and resiliency.
- Unlike traditional cements, resins are not susceptible to contamination while being placed in the downhole environment. Resin can also be weighted to aid placement.
- IntegraSqueeze Resins can be pumped with conventional cementing equipment, minimizing operational complexity
- Features & Benefits
- Effectively gains access and penetrates microannuli and small leaks, even in extreme wellbore geometries
- Stronger and more ductile than conventional cement
- Offers long-term durability and stability
- Withstands wellbore stresses
- Creates an effective, long-lasting seal
- Not affected by water contamination during placement
- Excess material is easily drilled
Applications & Uses
- Markets
- Applications
- Applications
- Remedial cementing operations
- Casing leaks
- Water shut-off
- Well abandonments
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density | 7 - 19 | ppg | — |
| Application Temperature | 60 - 300 | °F | — |
| Set Time (Typical Applications) | 1.0 - 4.0 | hours | — |
| Compressive Strength | 10000.0 | psi | — |
| Tensile Strength | 5000.0 | psi | — |
| Bond Strength | 2000.0 | psi | — |