Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Outstanding Features
- Cured film is flexible, tough, and abrasion resistant.
- Has fast setting properties and rapid strength build.
- User friendly, fast application.
- Will not discolor or degrade un‐ der UV radiation.
- Reduces down time after coating application.
- Will accommodate movement as well as resist abrasion and wear.
Applications & Uses
- Compatible Substrates & Surfaces
- Applications
All surfaces to be coated must be clean, dry, and completely free of loose particles, grease, oil, or any substance that would interfere with proper bond. CLEARCOAT FP Hardener container should be emp‐ tied into the CLEARCOAT FP resin & stirred for 3 minutes, then allowed to sit for 10 minutes or as long as necessary for all air to escape. CLE‐ ARCOAT FP may be applied over products such as Polafloor AC after the Polaroof AC has been thor‐ oughly dry for at least 24 hours. If overcoating a painted surface, check compatibility first, as some paints may bleed color. CLEARCOAT FP may be applied by brush or airless spray technique in a thin, even coat. Care should be taken to avoid creating foam or trapping air bubbles which may later result in pinholes or hazing. If traction enhancement is required, iron‐free sharp white quartz sand or AsperGrit Plastic Granules may be broadcast into the wet CLEAR‐ COAT FP. After the first coat has thoroughly dried with the embed‐ ded grit, a second coat of CLEAR‐ COAT FP is applied to thoroughly encapsulate the aggregate. Sized and graded sharp white quartz sand and AsperGrit are available from Andek Corporation. Equipment may be cleaned with water while the CLEARCOAT FP is still wet.
- Limitations
Do not use below 40°F. Do not apply if the application cannot be protected from precipitation for 4 hours. Shelf life is 12 months when stored in proprietary contain‐ ers between 45°F and 95°F.
- Maintenance
Damaged areas should be thor‐ oughly sanded and cleaned and then recoated. Dirt accumulations may be removed with warm water and detergent.
Properties
- Color
Technical Details & Test Data
- Specifications
Coating: Fluoropolymer urethane
Recommended Thickness: 2 ‐ 3 mils Dry Film Thickness (DFT) per coat
Coverage: Approx. 350 to 400 square ft/gallon, depending upon substrate
Safety & Health
- Precautions
Keep out of reach of children and pets.
Packaging & Availability
- Packaging
1 gallon pails
Storage & Handling
- Pot Life
6 hours
- Shelf Life
1 year (unopened) from date of manufacture