Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Outstanding Features
- Can be used over steel, alumi‐ num, tin, copper, rubber, con‐ crete, masonry, wood, and oth‐ ers.
- Produces a fully adhered, seam‐ less, high density, waterproofing membrane that is totally vapor proof (may be used as a vapor barrier).
- Protects substrate against rust, corrosion, UV damage, acid rain, and fungal attack.
- Easy to apply straight out of the container by brush, roller, or airless spray.
- May be used on vertical, pitched, and horizontal surfaces and withstands ponding water.
- Remains flexible, tough, and weatherproof at low tempera‐ tures and will not flow at high temperatures.
- White POLAROOF NW carries Energy Star certification.
- Will not re‐emulsify or wash away with rainwater.
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Applications
Surfaces must be dry, free of dirt or loose debris, free of oils, greases or any substances that will interfere with bond. All repairs of damage or defects must be made prior to product application. Refer to the POLAPRIME Data Sheet for infor‐ mation regarding selection of primer, if necessary. POLAROOF NW is applied straight out of the can after 2 minutes of gentle low speed mixing or stir‐ ring. Apply the product using brush, roller or spray technique. If airless spray application is desired, a custom blended POLAROOF NW version is available to be used with the following equipment specifica‐ tions: Ratio 30:1 or 40:1/2" hose and a #35 or larger tip. A shorter hose length will increase output at the tip. Apply POLAROOF NW in a smooth, even fashion to achieve a uniform coating thickness in either one or two coats as desired.
- Limitations
Do not apply to wet or frozen sur‐ faces that are saturated with mois‐ ture. Proper surface preparation and priming where indicated are important to product perform‐ ance. Shelf life is 2 years when stored in a factory sealed container between 45°F and 90°F. This prod‐ uct is flammable. Keep away from sources of heat, sparks, and flames. Use only EP rated equip‐ ment.
- Maintenance
If a surface becomes dirty, wash with a mild soapy water solution. If an area becomes nicked or cut, re‐ coat with POLAROOF NW. Clean tools and equipment with xylene or toluene solvent. Do not allow any solvent to contact POLAROOF NW that has been applied.
Technical Details & Test Data
- Specifications
Coating: Type Ethylene Elastomer
Recommended Thickness: 2 coats yield 18 to 26 mils Dry Film Thickness (DFT)
Coverage: Approximately 33 to 50 SF per gal; 2 to 3 gal per 100 SF (total for 2 coats)
Safety & Health
- Precautions
Keep out of reach of children and pets.
Packaging & Availability
- Packaging
5 US gallon pails; also available in 1 gallon pails and 55 gallon drums
- Color
24 standard colors. Custom colors are also available
Storage & Handling
- Pot Life
Not applicable (single component)
- Shelf Life
2 years (unopened) from date of manufacture