Products

APChem OMS is a highly concentrated (70% active) oil-based slurry used to break hydrocarbon gels. Effective temperature range from 4 to 149°C.

APChem CFL 205 is a synthetic, water-soluble, latex powder effective from 60 to 232°C to make cement more elastic (less shattering on perforating). Can be used with fresh water, seawater, calcium chloride water (up to 8%), and saturated saltwater.

APChem NE 409 is a blend of non-ionic surfactants specially designed for preventing emulsions formed during well fracturing treatments utilizing hydrocarbon based fluids. Compatible with all of APChem's hydrocarbon-based fracturing fluid systems and has no effect on the gelling properties.

APChem BXL 8.5 is an aqueous borate cross-linker that contains internal buffers to automatically raise the pH of the gelled fluid to the range of 8.5 to 8.7 and enable the use of enzyme breakers. Provides an immediate cross-link for low temperature applications below 60°C.

APChem NE 201 is a nonyl phenol resin with additional surfactants that functions as a non-emulsifier and surface & interfacial tension reducer. Leaves the formation "water-wet" to assist in well clean up after fracturing and acidizing treatments.

APChem HGA 44 is a organo-metallic complex cross-linker that rapidly releases its metal hydroxide for cross-linking HGA-37 up to 121°C.

APChem CFL 117 is a synthetic polymer used to control loss of filtrate from cement in fresh to salt water slurries up to 204°C. Has non-gellation properties, which make it ideally suited for squeeze cementing and coiled tubing squeeze cementing. Also available as a liquid; CFL-117L is a 41.7% active, non-aqueous suspension.

APChem Latex 10L is a synthetic copolymer developed to control fluid loss over a broad temperature range, 15.5 to 232°C in fresh to saturated saltwater slurries. Effective in lightweight, dispersed slurries. CFL-3000L is a 16% active liquid version.

APChem CFL 110 is a powdered polysaccharide derivative suitable for application in fresh water or with salt up to 18% by weight of water (BWOW). Effective to 220°F (104°C). Acts as a retarder at temperatures below 71°C.

APChem HGA 48 is an organo-metallic complex that functions as a cross-linker for hydrocarbon-based fracturing fluids. Temperature range is over 149°C.

APChem CWF-311 is a blend of different, complex, alcohol ether sulfates that is effective in fresh or hard water, saturated brines, and in the presence of oil up to 177°C.

APChem BXL 10 is an aqueous borate cross-linker that contains internal buffers to automatically raise the pH of the gelled fluid to the range of 9.0 to 11.0 (optimally 10.0). Provides an immediate cross-link and is stable to 121°C.

APChem CFL 3000 is a synthetic copolymer developed to control fluid loss over a broad temperature range, 15.5 to 232°C in fresh to saturated saltwater slurries. Effective in lightweight, dispersed slurries. CFL-3000L is a 16% active liquid version.

APChem BXL-STD is a delayed borate systems which help to minimize friction pressures by delaying the cross-link time of the base gel. BXL-STD provides a 2 to 3 minute delay for HPG gels.