Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
Easily applied and containing over 90% zinc metal, Galve Cote may be used as a shop primer or coating for steel pipes and fabrications and may be top-coated with chlorinated rubber paints, acrylic, cellulose, alkyd, P.U-alkyd or epoxy materials or virtually any other single pack system. GALVE COTE S aerosol is especially recommended for smaller areas. Aerosol GALVE COTE is also ideal for patching work, such as after new welding of galvanized section or otherwise where galvanizing has been stripped. Effective GALVE COTE will protect coated metal from corrosion even in demanding environments, such as coastal or off-shore. Ideal for use on structural steelwork, tankage, harbor installations, jetty piling, roofs and gutters. In this case, Galve Cote will effectively renew original galvanizing.
- Features and Benefits
- Cathodic Action: Actively protects steel and iron surfaces by "sacrificial" action, resulting in extended time between re-painting requirements.
- High Zinc Content: Virtually at maximum achievable level, ensures that you get the maximum cathodic protection.
- Single Pack:No measuring and mixing of components necessary - stir the bulk product well and apply, or simply shake the handy aerosol pack well and apply.
Applications & Uses
- Applications
- Application Area
- Compatible Substrates & Surfaces
- Application
Bulk Product: May be applied by (preferably) airless spray, conventional spray or, for small patches only, by brush. Read our Technical Specification Sheet (Ref. TI-Galve Cote) for full preparation and application details. Theoretical coverage at the rates recommended for airless spray will be 16.8 to 8.4 m2 per liter. Aerosol Product: Shake the can until the agitator can be heard moving freely, then for a further minute at least. Spray from 25-30cm on to the surface, using a series of light coats to build up the required thickness. Allow 2-4 hours drying before over-coating.
Packaging & Availability
- Packaging Type
- Packaging
The bulk product is available only in 2.5 liter tins, while the aerosol product is available as a 400ml aerosol, packed in cases of 12.