company tower banner
Arabian Chemical Industries Company Logo

Arabian Chemical Industries ISOPLAS BT

Arabian Chemical Industries ISOPLAS BT is a liquid solution of modified ligno sulfonic acid which is free of any chloride ions. It is waterreducing, plasticizing, set retarding admixture for concrete. It provides a more plastic and cohesive mix in the fresh concrete, with better durability, reduced shrinkage and less permeability. ISOPLAS BT is compatible with mixes containing Type 1 and sulfate-resistant cement.

Product Type: Concrete Admixture

Features: Good Cohesion, High Durability, Water Reducing

Physical Form: Liquid

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Product Type

Features & Benefits

Advantages
  • Up to 12% water reduction with same slump compared to no-admixture concrete.
  • Does not entrain air in fresh concrete.
  • Increased strength while maintaining same cement content and workability.
  • Increased workability while maintaining same water content.
  • Reduced cement content while maintaining same slump without loss in target strength.
  • Better cohesion and finishing properties than plain, no-admixture concrete.
  • Compatible with ISOLA admixture such as superplasticizers and air entraining agents.

Applications & Uses

Compatible Substrates & Surfaces
Application

ISOPLAS BT is used in concrete of all classes. It is used in ready-mixed, job site mixed and lightweight concrete.

Dosage

ISOPLAS BT is added to concrete at the rate of 0.6 – 1 liter per 100 kg cement depending on the degree of the water reduction and plasticizing and set retardation required. Overdosing may result in extended retardation but ultimate strength characteristic is not affected. For a given setting time, water reduction and strength requirements, trial mixes should be carried out to determine optimum dosage.

Dispensing
  • Approximately 70% of the total amount of mixing water is added to the dry ingredients while mixing for a minimumof 45 seconds.
  • ISOPLAS BT is then added simultaneously with the remaining 30% water and mixed further until homogeneous in appearance.

Properties

Physical Form

Regulatory & Compliance

Certifications & Compliance
Specification

ISOPLAS BT complies with the requirements of ASTM C 494 TYPE A, B, D and BS EN 934-2.

Safety & Health

Safety & Health

ISOPLAS BT is mildly alkaline. Always wear protective hand gloves when handling. If accidentally splashed on the eyes, wash thoroughly with clean water and seek medical attention.

Packaging & Availability

Packaging Type
Packing

ISOPLAS BT is packed in 210 liter drum or bulk.

Storage & Handling

Shelf Life

Twelve months in original container stored in warehouse condition.