Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Advantages
- Compatible with fly ash and microsilica.
- Excellent slump retention and super high mechanical strength.
- High early and 28 day strength.
- Very low water cement ratio achievable (less than 0.30) without sacrificing workability.
- Dense, watertight concrete
- Very good cohesion even at high slump (+ 200 mm)
- Flexible dose - normal, mid range and high water reduction.
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Dosage
Depending on mix design requirement, ISOPLAS PC 300 can be added at the rate of 0.30-1.35 liters per 100 kilograms cement. When designing mixes for use with ISOPLAS PC 300, it is recommended to make trial batches to determine optimum dosage. As a guide for designing mixes, ACI 211.1 or 211.2 procedures are recommended.
- Addition
- ISOPLAS PC 300 can be added at the plant or at the site. For central mix type operations, approximately 80% of the total amount of mixing water is added to the dry ingredients. Mix for 30 seconds then add ISOPLAS PC 300 simultaneously with the remaining water. For 1 cubic meter batch, total mixing time from the time cement comes in contact with water should be not less than 100 seconds.
- (Note: ISOPLAS PC 300 is compatible with other ISOLA admixtures — ISOPLAS BT, AEA. Not to be combined with ISOLA PSM or PSG, for further details, consult ACI.
Properties
- Physical Form
Regulatory & Compliance
- Certifications & Compliance
- Specification
ISOPLAS PC 300 conforms with the requirements of ASTM C494 Types A and F. Also complies with EN 934-2.
Safety & Health
- Safety & Health
As with any other chemicals, always use protective rubber gloves, eye and body protection when handling.
Packaging & Availability
- Packaging Type
- Packing
ISOPLAS PC 300 is available in 210 liter and 1000 liter pack.
Storage & Handling
- Shelf Life
Twelve months in original container stored in warehouse condition in original, unopened packing.