Knowde Enhanced TDS
Identification & Functionality
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Compatible Substrates & Surfaces
- Direction For Use
The surface has to be sanded to a professional standard, dry and free from contamination. Protect the floor from direct sunlight and keep off all underfloor heating from day before application till 24 hours after application. Final sanding of the floor should be done with sanding paper 120 grit belt or 100 grit screen. The temperature of the floor, Vibrant primer and air must be between 13°C (55°F) and 25°C (77°F). Relative humidity of the room should be between 40% and 60%. Higher humidity of room extends drying time of primer thus waiting time between layers.At high temperatures and low relative humidity add 2% Arboritec “Extender”. Shake the container before use for 30-60 seconds. Allow it to rest for 2-3 minutes before applying. Do not dilute the primer.
- Application
Application of the primer should be carried out along the direction of parquet strips and wood. If possible, do not apply the primer cross the direction of daylight. Windows/doors must be closed to prevent air flow and ventilation should be shut down for the time of application. If possible prevent direct sunshine on the floor during coating. Vibrant is suitable for application with a lightweight t-bar applicator, roller or brush. Always test the product on a smaller area to ensure color and adhesion. Apply Vibrant with a t-bar applicator in one layer at the rate of 400-500 sq. ft. per gallon. Do not use the same applicator to apply both sealer and finish. Avoid applying in direct sunlight. Make sure that Vibrant is completely dry before applying the first coat of Arboritec finish. If it is necessary to abrade Vibrant, start with a maroon pad with 1-2 150-grit sanding strips, or a 150-grit or finer sanding disk or screen. If the first top coat is applied over Vibrant within 48 hours, there is no need to abrade for adhesion. It is always recommended to use Arboritec finishes with Arboritec Vibrant.
- Cleaning of Tools
- Thoroughly clean all application tools with water, right after using
- Maintanance
- To keep the floor looking its best, clean and maintain floor using Aboritec “Cleaner Spray”and ”Refresher”, following application instructions
- Do not clean the floor before it is fully cured
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| VOC (US) | max. 75 | g/L | — |
| VOC (EU) | 96.0 | g/L | — |
| Solids by Volume | 32.0 | % | — |
| pH | approx. 8 | — | — |
| Odour | Very Light, Non Offending | — | — |
| Coverage (T Bar) | 400 - 500 | sq. ft./Gallon | — |
| Coverage (Roller) | 8 - 11 | m² | — |
| Drying Time (20°C, RH 50%) | 40 - 60 | min | — |
Technical Details & Test Data
- Chemical Resistance
- Resistant to grease, water and ordinary household cleaners and detergents
- Knoop Mineral Hardness Test Values
Diamond 8000 - 8500 Ceramic 4500 - 4600 Aluminum Oxide 1800 - 2200
Safety & Health
- Safety
- Non-hazardous
Packaging & Availability
- Packaging
US: Carton of 3 x 1 gallon
EU: Carton of 3 x 5 liter cans
Storage & Handling
- Storaging
- 1 year from date of manufacture in unopened original container at 41°F (5°C) to 77°F (25°C)
- Keep from freezing
- Disposal
- Never pour surplus finish down the drains. Dispose it in accordance to local regulations