Archem PRs

Archem PRs Grade XLD 30WR Hi Flow Extra Low Dust Coated is specifically designed for today’s high speed modern Perfecting Presses to prevent Ink set off in the stack when printing on 200gsm to 500gsm substrates. The quoted stock gsm range for this specific grade is intended as a guide only. The correct micron size to use will also depend on other factors such as type of paper, weight of ink film etc. Non-absorbent substrates may require a larger micron spray powder.

Archem PRs Grade 15WR Hi Flow Extra Low Dust Coated IS specifically designed for today’s high speed modern Perfecting Presses to prevent Ink set off in the stack when printing on 30gsm to 200gsm substrates. The quoted stock gsm range for this specific grade is intended as a guide only. The correct micron size to use will also depend on other factors such as type of paper, weight of ink film etc. Non-absorbent substrates may require a larger micron spray powder.

Archem PRs Grade XLD 22WR Hi Flow Extra Low Dust Coated is a starch based anti set off powder, designed for today’s high speed modern Presses to prevent Ink set off in the stack when printing on 150gsm to 350gsm substrates. The quoted stock gsm range for this specific grade is intended as a guide only. The correct micron size to use will also depend on other factors such as type of paper, weight of ink film etc. Nonabsorbent substrates may require a larger micron spray powder.

Archem PRs Grade XLD 35S Extra Low Dust Uncoated is formulated for use in all applicator types. Archem PRS XLD-35S is designed to prevent Ink set off in the stack when printing on 250gsm to 450gsm substrates. The quoted stock gsm range for this specific grade is intended as a guide only. The correct micron size to use will also depend on other factors such as type of paper, weight of ink film etc. Non-absorbent substrates may require a larger micron spray powder.

Archem PRs XLD 35WR Hi Flow Extra Low Dust Coated is specifically designed for today’s high speed modern Perfecting Presses to prevent Ink set off in the stack when printing on 250gsm to 500gsm substrates. The quoted stock gsm range for this specific grade is intended as a guide only. The correct micron size to use will also depend on other factors such as type of paper, weight of ink film etc. Non-absorbent substrates may require a larger micron spray powder.

Archem PRs Grade XLD 50S Extra Low Dust Uncoated is specifically designed for today’s high speed modern Perfecting Presses to prevent Ink set off in the stack when printing on 350gsm to 1000gsm substrates. The quoted stock gsm range for this specific grade is intended as a guide only. The correct micron size to use will also depend on other factors such as type of paper, weight of ink film etc. Non-absorbent substrates may require a larger micron spray powder. Ideal for Multi pass work or where follow on trades such as lamination, foil blocking or UV varnish are being used.

Archem PRs Grade 2500R Coated is a starch based anti set off powder, designed for today’s high speed modern Presses to prevent Ink set off in the stack when printing on 250gsm to 450gsm substrates. The quoted stock gsm range for this specific grade is intended as a guide only. The correct micron size to use will also depend on other factors such as type of paper, weight of ink film etc. Non-absorbent substrates may require a larger micron spray powder.

Archem PRs Grade XLD 20S Uncoated is an uncoated, extra Low Dust starch based anti set off powder, designed to prevent Ink set off in the stack when printing on 150gsm to 350gsm substrates. The quoted stock gsm range for this specific grade is intended as a guide only. The correct micron size to use will be determined by other factors such as type of paper, weight of ink film etc. Non-absorbent substrates may require a larger micron spray powder. Ideal for Multi pass work or where follow on trades such as lamination, foil blocking or UV varnish are being used.

Archem PRs Grade XLD 20WR Hi Flow Extra Low Dust Coated is specifically designed for today’s high speed modern Perfecting Presses to prevent Ink set off in the stack when printing on 50gsm to 350gsm substrates. The quoted stock gsm range for this specific grade is intended as a guide only. The correct micron size to use will also depend on other factors such as type of paper, weight of ink film etc. Non-absorbent substrates may require a larger micron spray powder.