Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Product Type
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Product Highlights
HydroSHIELD™ Clear White can be used over DynaShield and HydroShield coatings as well as, epoxy coatings, urethane coatings and can be used over plywood and concrete. HydroSHIELD™ Clear White is a single component water- based sealer, therefore has no noxious fumes and cleans up with soap and water. This unique linear chemistry provides the user a high-performance, roof traffic wearing resistance and doesn’t require a catalyst. HydroSHIELD™ Clear White carrier is water and cross-links during the evaporation process curing within 24 hours at 70°F. Inter-coat adhesion is great therefore multiple applications/coats may be applied depending on customers need. HydroSHIELD™ Clear White polymer is formed in a reactor. HydroSHIELD™ Clear White is not reducible by solvents or any oil-based products on the market. HydroSHIELD™ Clear White provides outstanding durability and toughness for roof coating finish and skylight protection. HydroSHIELD™ Clear White is safe and easy to use. Anywhere air borne dirt resistance is desired HydroSHIELD™ Clear White will meet the need.
- Outstanding Features
Meets or exceeds all EPA, VOC health and safety standards.
- Single - component formula
- Self - crosslinking
- Rapid hardness development UV Resistant,
- Non - yellowing abrasion resistant
- Impact resistant.
Applications & Uses
- Markets
- Application
When using spray method ARC recommends 3,000 psi high pressure sprayer at 1 gallon p/m or better. ARC recommends when using a roll method of application, a 3/8” to ½” nap accompanied with a 2 to 6-inch brush for details as needed. When coating only apply. 75 gallon per 100 square feet per pass. Allow to dry, will be clear, and optional second coat may be applied at .75 gallon per 100 square feet.
Properties
- Color
- Technical Data
Value | Units | Test Method / Conditions | |
Adhesion | Excellent | — | ASTM D-3359 |
Cure Time (70°F) | 24.0 | Hours | — |
Dry Time (70°F) | 4.0 | Hours | — |
Percent Solids (By weight) | Min. 50 | % | — |
Scrub Resistance | Excellent | — | — |
Tensile | Hard | — | — |
Viscosity | max. 600 | cps | — |
VOC | max. 50 | grams/liter | — |
Weatherometer (4000 Hours) | Passed | — | — |