Brands

ARDEX X 3™ Tile and Stone Mortar is a Portland cement-based, polymer-modified mortar with good bond strength and sag resistance and a 3-hour pot life. ARDEX X 3 mixes to a creamy, easy to apply thin set mortar that is water and weather resistant. ARDEX X 3 can be used to install quarry, ceramic and most natural stone tiles on many common interior or exterior surfaces and also can be used for setting porcelain tile over interior, absorbent concrete and other cementitious surfaces. ARDEX X 3 is recommended for the installation of most tile sizes, including mosaics, and is suitable for use over concrete floors with in-floor heating systems.

ARDEX X 90 OUTDOOR™ MicroteC3 rapid-set, flexible tile and stone mortar is a revolutionary innovation in mortar technology that is formulated with specialty, high-performance ARDEX cements, polymers and microfibers to deliver maximum protection against the harshest weather conditions and provide the highest levels of efflorescence resistance for exterior tile and stone applications. ARDEX X 90 OUTDOOR can be installed over substrates with temperatures as low as 40˚F (5˚C) and can withstand driving rains or be grouted in only 2 hours.

ARDEX X 77™ MICROTEC® fiber reinforced tile and stone mortar is a high-performance, microfiber-reinforced, polymer-modified mortar formulated especially for large format tile installations. Use to install porcelain, glass, quarry, ceramic and most natural stone tiles over interior or exterior concrete and masonry floor and wall surfaces. Also use for interior applications over exterior-grade plywood. ARDEX X 77 is ideal for use in swimming pools and fountains and over in-floor heating systems and is recommended for all tile sizes, including mosaics.

ARDEX X 5™ is a highly versatile, polymer-modified, large format and heavy tile and stone mortar for setting porcelain, quarry, ceramic and most natural stone tile over common interior surfaces, including exterior-grade plywood, as well as exterior concrete and masonry surfaces.

ARDEX S 28™ MICROTEC® rapid-set, rapid-dry, super-format tile and uncoupling membrane mortar is a high-performance, rapid drying and rapid hardening, microfiber-reinforced, polymer-modified tile and stone mortar for interior installations. ARDEX S 28 is highly flexible with virtually no shrinkage and has an extended open time, making it perfect for large and super-format tile and stone installations. Due to its semi-pourable consistency, ARDEX S 28 is excellent when used with ARDEX FLEXBONE® uncoupling membranes and other approved uncoupling membranes. ARDEX S 28 is ideal for moisture-sensitive tile and stone such as green and light marbles because it is formulated with ARDEX proprietary self-drying technology where the mix water is completely bound into the matrix. This technology eliminates water evaporation, which virtually prevents staining and warping of moisture-sensitive tile and fully cures quickly between even the largest, most dense tiles and substrates.