Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Ideal prep for metal surfaces and white coatings
- Rust inhibitors block bleed-through
- Penetrating formula
Applications & Uses
- Markets
- Compatible Substrates & Surfaces
- Preparation
All surfaces must be dry and free of dust, dirt, oil, loose or peeling paint and all other foreign matter. Rusty metal must be cleaned with a wire brush. Pressure washing after wire brushing gives best results. Mix Contents Thoroughly Before Using. Mechanical Mixing Recommended.
- Application
- For exterior use only. Apply by brush, roller, or suitable spray equipment, avoiding coating build up or puddling.
- Note : Application to surfaces above 110°F is not recommended.
- Dry Time : Product will dry in 2 hours in dry weather above 80°F. Humidity and/or colder weather will extend drying time. Product can be recoated immediately after drying. Do not apply when heavy dew or rain is expected within 2-4 hours.
- For Best Results : Apply when surface temperatures are between 50°F and 110°F. In colder weather, store product in heated room (65°F to 80°F) at least 24 hours prior to application.
- Note : Do not apply on single ply membranes such as EPDM, TPO, PVC, or Hypalon. Test small area first if there is a question of compatibility.
- Coverage Rate : 400 sq. ft./gal
- Consistency : Brush, Roller, or Spray
- Clean-up : Clean tools or spills with mineral spirits or paint thinner.
- For exterior use only. Apply by brush, roller, or suitable spray equipment, avoiding coating build up or puddling.
Properties
- Color
- Physical Properties
Value | Units | Test Method / Conditions | |
Weight Per Gallon | 11.0 | lbs. | - |
Residue by Evaporation | 65 | minutes | |
Adhesion to Polyurethane Foam | Not Recommended | - | - |
Combustible Solvents | 35.0 | % | - |
Cure Time (50% Relative Humidity, 70°F) | 2 - 4 | hours | |
Application Temperatures | 50 - 110 | °F | - |
Safety & Health
- Precautions
Precautions should be taken to prevent odors from entering the building. When transporting this product, ensure that lid is tight and pail secure and upright. Do not allow pail to tumble as this may cause lid to loosen and leakage to occur. Do not transport on passenger seats or inside the passenger compartment of any vehicle. Store product in the cargo area of vehicle, and secure over protective cloths to prevent damage due to accidental spills. Do not store at temperatures above 110°F. Do not reuse empty containers. Do not use in drinking water or food systems. Seal container when not in use.
- Caution
Combustible Mixture , Harmful or Fatal if Swallowed. Eye, Skin and Respiratory Irritant
If swallowed DO NOT induce vomiting. Call physician immediately. In case of : Eye contact - flush with large amounts of room temperature water for 15 minutes; Skin contact - wash thoroughly with soap and water; Irregular or stopped breathing - administer oxygen, give artificial respiration and get medical attention immediately. Avoid prolonged breathing of vapor or spray mist.
Packaging & Availability
- Packaging Type
- Shipping Weights
5 gallons (18.9L) 57 lbs. 55 drums (208.2L) 650 lbs. (Note: All approx. weights include container.)