Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Chemical Resistance
Ex-alkali, Good-solvent, Fair acid
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Improves Adhesion
- Ideal for Metal & BUR
- Fast Setting
Applications & Uses
- Markets
- Preparation
Surfaces must be clean, dry, and sound; contaminants such as dirt, dust, grease, wax, oils, soap film, mold & mildew, bond breakers, curing compounds, and loose, peeling paint must be removed before priming or painting. Remove all mildew by scrubbing with a solution of 16 oz bleach to one gallon water. Rinse thoroughly and allow to dry 24 hours before coating.
- Application
For exterior use only.
- Protective clothing, gloves, and eyewear should be used during application of this product. Always apply on a clear, warm sunny day.
- Premix individual components (A and B) separately before combining. Then, in a separate pail, mix Part A and Part B in equal amounts.
- Use a mechanical drill to ensure proper mixing.
- Once mixed, product must be used within 30 minutes. Pot life 2 hours at 75 °F.
- Dry to touch in 1 hour, full cure 24 hours.
- Apply in morning hours to allow maximum cure time.
- Application should be completed a minimum of 4 hours prior to sunset. Surface temperatures must be between 50 °F and 130 °F.
- Apply with long nap (3/4” to 1”) exterior paint roller for porous surfaces like concrete block and use a short nap (1/4” to 3/8”) for smooth surfaces like metal. This product should not be spray applied.
- Tool Application : Brush or roller
- Application Rate
Apply pre-mixed primer at 1/4 gallon per square and allow to cure. Additional coats may be requires depending on age and condition of existing substrate. Allow a minimum of 2 hours between coats if required. Allow primer to fully cure a minimum of 24 hours before applying AP-585 Silicone Coating. Note: Existing substrates, materials and age of asphalt (cutback, SBS, APP, hot mop, etc) and may result in some discoloration over time. This does not affect weatherability of silicone.
Clean-up : Clean tools with paint thinner or mineral spirits
Properties
- Physical Properties
- Note
Percentages listed are + or - 3%
| Value | Units | Test Method / Conditions | |
| Weight Per Gallon | 13.0 | lbs. | - |
| Solids by Weight | 86.0 | % | - |
| Solids by Volume | 80.0 | % | - |
| Permeability | Solvent & vapor resistant film | - | ASTM D1653 |
| Skin Time (50% Relative Humidity, 70°F) | 1 | hour | |
| Full Cure (50% Relative Humidity, 70°F) | 24 | hours | |
| Application Temperatures | 50⁺ | °F | - |
| VOC (Mixed A&B Combined) | max. 60 | g/L | - |
Packaging & Availability
- Shipping Weights
5 gallons (18.9L) 63 lbs. (Note: All approx. weights include container)