Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Product Highlights
- Styrene Butadiene Rubber is made from cold polymerization of styrene and butadiene monomers through low-temperature emulsification polymerization and has similar characteristics to natural rubber.
- It is a general-purpose rubber and is produced in the largest volume of any synthetic rubber.
- SBR 1500 is light-colored and non-staining.
- This is the highest volume general-purpose synthetic rubber.
- It is very weak unless reinforcing fillers are incorporated. With suitable fillers, it is a strong rubber, although not approaching natural rubber or polychloroprene. Otherwise, it has similar chemical and physical properties to natural rubber, with generally better abrasion resistance but poorer fatigue resistance.
- Characteristics
- Good resilience
- Good compression set
- Fair to good heat aging
- Good to excellent abrasion resistance
- Fair tear strength
- Poor flame retardant properties
- Poor weathering characteristics
- Fair oxidation resistance
- Poor ozone resistance
- Poor oil resistance
- Fair to good acid resistance
- Fair to good resistance to alkali substances
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
Properties
- Physical Form
- Typical Properties
- Specifications
Value | Units | Test Method / Conditions | |
Durometer Hardness | 40 - 90 | Shore A | — |
Specific Gravity (Polymer) | 0.94 | — | — |
Tensile Strength | max. 2500 | psi | — |
Low Temperature Brittle Point | -70.0 | °F | — |
Value | Units | Test Method / Conditions | |
Mooney Viscosity (100°C, Group One) | 37 - 44 | ML 1+4 | — |
Mooney Viscosity (100°C, Group Two) | 45 - 54 | ML 1+4 | — |
Tensile Strength (Group One) | 245.0 | Mpa | — |
Tensile Strength (Group Two) | 255.0 | Mpa | — |
Elongation at Break | 550 - 570 | % | — |
Elongation at Break | 28.0 | % | — |
Copper Content | 0.00015 | % | — |
Iron Content | 0.003 | % | — |
Mass Losses (Drying) | 0.35 | % | — |
Ash Content | 0.6 | % | — |
Antioxidant | 0.15 - 0.35 | % | — |
Organic Acids | 5.4 - 6.7 | % | — |
Organic Soaps | 0.25 | % | — |
Oil by Weight | 14.5 - 17.0 | % | — |
Bound Alphamethyl Styrene | 21 - 24 | % | — |
Packaging & Availability
- Country Availability
- Packaging Type
- Packing
SKMS-30 ARKM-15 is produced in 30kg briquettes, wrapped in marked polyethylene film and four-layer craft bags. The briquettes are packed in wooden pallets of about 450kg net weight.
Storage & Handling
- Storage
The rubber should be stored away from direct sunlight and atmospheric precipitation. Storage temperature should not exceed 30°C.