Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Advantages
- The outer layer made of polyethylene terephthalate (PET) provides for excellent optical properties (gloss and transparency) and heat resistance of the film.
- The polyamide layer (РА) provides for excellent strength characteristics of the film.
- Ethylene vinyl alcohol (EVOH) procures for a high oxygen barrier and provides for:
- microbiological stability of the products during storage;
- retardation of the oxidation processes that cause rancidification of the fats contained in the food products.
- The inner polyethylene (РЕ) layer allows sealing within a wide temperature range to obtain a tight seal and provides a barrier to water vapor (zero weight losses during storage).
- Biaxial orientation of the film provides for even stretching in the course of molding and excellent strength properties (including the corners).
- The low specific weight of the film (kg/m2) ensures a perfect ratio between the product weight and the packaging weight.
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Printing
The AMISTYLE CP-T film is suitable for multicolor or CMYK printing.
Printing is applied by the flexographic method. The inks are resistant to boiling, fats, and mechanical action.
Properties
- Color
- Typical Properties
Value | Units | Test Method / Conditions | |
Film Width | 100 - 665 | mm | - |
Thickness | 75.0 | μm | - |
Technical Details & Test Data
- Film Processing Technology
Film storage and transportation
4.1.1. Keep the film in enclosed dry rooms at a distance of not less than 800mm from heaters, in the absence of strong-smelling or corrosive substances, at a temperature from + 5 °С to +35 °С andrelative humidity not more than 80 %.
4.1.2. Transport the film at temperatures not exceeding 40 °С, and protect against direct sunlight.
4.1.3. When the film is stored at a temperature below 0 °С, keep it at room temperature before processing for at least 24 hours without opening the manufacturer's packing4.2. Food product packaging
Packaging of food products in the AMISTYLE BP-T/CP-T films shall be made in production rooms meeting the requirements of the applicable food safety regulations and standards. To ensure stability of the packaging process, observe the manufacturer- recommended operating modes for the packaging equipment. Loading of the film in the automatic equipment must be made in accordance with the instructions of the equipment manufacturer and the loading procedure. Take care to maintain the film well-tensioned during the operation.
The equipment settings (forming and sealing temperature, packages per minute rate, etc.) shall be selected on a case-by-case basis. The AMISTYLE BP-T/CP-T films have a heat-sealable polyethylene (PE) layer on the inward side of the film web.
Packaging of food products with the use of the AMISTYLE BP-T/CP-T films includes the following stages:
4.2.1.Forming of a tray from the roll of the AMISTYLE BP-T bottom film Trays are made automatically by heating of the rolled AMISTYLE BP-T bottom film and forming of tray shapes by using of vacuum and/or compressed air flow (depending on the thermoformer design). The maximum depth of a tray formed from the AMISTYLE BP-T film depends on the number of trays formed per cycle of the equipment; the maximum depth may be as great as 10cm for the 1x1 and 1x2 formats. Recommended thermoforming parameters for the AMISTYLE BPT film: Forming temperature: 85-105 °C Film heating temperature: ca. 2-4 s Film drawing time: 1-2 s Drawing pressure: 1.5-2.0 bar. 4.2.2. Placement of food in the formed tray The formed trays are fed by a belt conveyor to the product dosage zone, where the food is placed on the tray automatically or manually. During the dosage take care to match the product volume with the tray size and shape.
4.2.3. Package sealing After dosage of the food into the trays, the thermoformer uses the AMISTYLE CP- T lidding film to seal the trays with simultaneous evacuation of air from the packages. Trays are sealed by means of heatsealing. To avoid premature heat-shrinkage of the AMISTYLE BP-T/CP-T films in the process of tray sealing, contour sealing plates should be used. The sealing temperature for the AMISTYLE BP-T/CP-T films varies depending on the equipment operation rate. and lies within the range of 120 – 150 °C. Take care to prevent the product getting into the film sealing zone, because this may lead to a loss of vacuum. The depth of vacuum should be preset depending on the product moisture content. The depth of vacuum should be reduced for packaging of high-moisture food. The seals must be even and continuous, bearing a clear imprint of the sealing bar, without any signs of burn-through. If the sealing quality is unsatisfactory, check the temperature settings.
4.2.4. Cutting of packages The sealed packages are conveyed for longitudinal and transverse cutting.
4.2.5.Heat-shrinking of the finished packages The food packages are subjected to heat-shrinking in shrink tanks or tunnels by immersion of packages in hot water or exposure to hot water (steam) at a temperature from 82 to 95 oC during 2-3 seconds. After that the packaged product may be dispatched for weighing, labeling and storage.
Packaging & Availability
- Packaging Type
- Forms Of Supply
Rolls on the 76 mm cardboard cores.
Storage & Handling
- Transportation And Storage Of Products
The products packaged in the AMISTYLE BP-T/CP-T films shall be transported and stored in accordance with the standard documentation applicable to the product (GOST, TU).
- Shelf Life
- The shelf life of the AMISTYLE BP-T film is 2 years from manufacture to processing, subject to compliance with the transportation and storage requirements for the user's warehouse, and provided that the manufacturer's packing remains intact.
- The shelf life of the AMISTYLE CP-T film is 1 year from manufacture to processing, subject to compliance with the transportation and storage requirements for the user's warehouse, and provided that the manufacturer's packing remains intact.