Products

Atlas Fiber G-9 Rod is a continuous woven glass fabric laminated with a melamine resin. Grade G-9 has good mechanical properties plus high resistance to flame, heat, arcing, and most strong alkali solutions. It is recommended for use where good mechanical properties are needed under wet conditions. G-9 is an exact substitute for G-5.

Atlas Fiber G-10 Rod is continuous woven glass fabric laminated with an epoxy resin. This grade is extremely high in mechanical strength, has low water absorption and dissipation factors and has superior electrical characteristics, which are exhibited over a wide range of temperatures and humidities. Note: G-10 and FR4 are two separate materials.

Atlas Fiber G-7 Rod is a continuous glass fabric laminated with a silicone resin. Grade G-7 is unequaled for high heat and arc resistant applications, and where good mechanical and electrical properties must be exhibited in humid conditions in excess of 450°F.

Atlas Fiber LE Phenolic Rod is a fine weave cotton fabric base phenolic laminate which provides a finer surface texture and better machinability than Grade CE. Grade LE is low in moisture pick-up and dissipation factor, and is excellent in all electrical properties. It can be machined easily and cleanly to very close tolerances, and is recommended for use where there is need for good mechanical properties combined with excellent electrical characteristics. LE is the "electrical" grade version of linen phenolic. Also available Linen L (Mil-I-24768/13 Type FBI).

Atlas Fiber Grade XXX Phenolic Rod is a paper base phenolic laminate with good mechanical properties, high dielectric strength, and good resistance to moisture. Grade XXX is our most economically priced grade and is recommended for most mechanical applications, for use at radio frequencies, and in high humidity situations. Grade XXX is the electrical grade paper phenolic.

Atlas Fiber CE Phenolic Rod is a course weave cotton fabric base phenolic laminate with greater mechanical strength than Grade XXX. Grade CE is strong, tough, and has high impact strength.  CE is the "electrical" grade version of canvas phenolic.  Also available Canvas C (Mil-II-24768/16 Type FBM).

Atlas Fiber FR-4 Rod is a continuous woven glass fabric laminated with an epoxy resin. This grade is extremely high in mechanical strength, has low water absorption and dissipation factors and has superior electrical characteristics, which are exhibited over a wide range of temperatures and humidities. Note: G-10 and FR4 are two separate materials.

Atlas Fiber G-3 Rod Glass Phenolic is an amber/brown material with a glass fabric reinforcement in a phenolic resin binder. G-3 is probably the strongest overall laminate with excellent tensile, compressive, impact, and flexural strength at elevated temperature.

Grade XX Phenolic Rod is a paper and resin based phenolic suitable for general purpose electrical applications. XX is the mechanical grade paper phenolic. Grade XX machines well and is easily used in punch part applications. Grade XX like all paper based phenolic is noted for it's smooth texture.

Atlas Fiber G-11 Rod is a grade similar in composition and properties to G-10 but more suitable for continued use at elevated temperature. G-11 retains at least 50% of its structural strength at elevated temperatures in excess of 300°F. Due to its higher cost, G-11 applications are limited to only the most critical high heat situations.