Atom Adhesives AA-BOND 2123

Identification & Functionality

Chemical Family: Epoxy & Epoxy Derivatives
Product Type: 2K (2 component) Adhesive,
Epoxy Adhesive,
Solvent free (100% Solids) Adhesive,
Structural Adhesive
Technologies: Ready-to-Use Products
Product Families: Ready-to-Use Products — Adhesives & Sealants
Structural Adhesives

Features & Benefits

Ready-to-Use Product Features: Acid Resistant,
Alkali Resistant,
Durable,
Electrically Insulating,
Rapid Cure Response,
Toughened,
Water Resistant
Product Highlights: AA-BOND 2123 is easy-to-use adhesive system contains no solvents and cures fairly rapidly at room temperature to a hard, low shrinkage solid, which bonds readily to steel, aluminum, and other metals, wood, concrete, glass, ceramics and many plastics.

Applications & Uses

Markets: Adhesives & Sealants
Applications: Adhesives & Sealants — Other Adhesives & Sealants Applications
Compatible Substrates & Surfaces: Aluminum,
Ceramic,
Concrete,
Glass,
Metal,
Plastics,
Steel,
Wood
Cure Method: Air Dry
Typical Application: Modern industrial repair, casting and bonding applications where a steel-like or cast iron finish is required.
Typical Repair Applications: Casting

Jigs

Molds

Forming dies

Plumbing Repairs

Tool and dies patching

Automotive repairs

Industrial maintenance
How To Use: Carefully clean and dry all surfaces to be bonded.

Apply this completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.

Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.

Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.

Properties

	Value	Units	Test Method / Conditions
Cure Type	Room temperature or Heat Cure	-	-
Mix Ratio by Weight (Resin: Hardener)	1900-01-03T04:10:00+00:00	-	-

	Value	Units	Test Method / Conditions
Operating Temperature	(-60) - 135	°C	-

	Value	Units	Test Method / Conditions
Hardness	88.0	Shore D	-
Machinability	Good	-	-
Magnetic	Yes	-	-
Dielectric Constant (Frequency 1000 Hz)	65.0	-	-
Dielectric Strength	1.18	kV/mm	-

Regulatory & Compliance

Technical Details & Test Data

Cure Schedule: 4 to 6 hours 65°C

24 hours 25°C

For masses over 25gm, allow material to gel for 4 hours @ 25°C follow by 100°C for 5 hours.

Packaging & Availability

Availability: This epoxy can be supplied in various different packages.

Size - 2.5gm pouch(s), 5gm pouch(s), 10gm pouch(s), 100gm kit(s), 250gm kit(s), 500gm Jar kit(s).

4 to 6 hours	65°C
24 hours	25°C

Knowde Enhanced TDS