Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
AA-BOND 28 contains a thixotrophic agent which impedes thinning out of the material during heat cure when properly mixed and cured.
- Benefits
- Room temperature or Heat Cure
- Tough enamel like cure
- Bonds to a variety of substrates
- Weather resistant
Applications & Uses
- Markets
- Typical Application
Staking components, bonding, laminating and repair applications.
- How To Use
- Carefully clean and dry all surfaces to be bonded.
- Apply AA-BOND 28 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
- Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
- Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
- Substrates
Metals, glass, ceramics, wood and many plastics.
Properties
- Appearance
- Amber
- Thermal Properties
- Typical Properties
- Cured Properties
- Uncured Properties
- Miscellaneous Properties
Value | Units | Test Method / Conditions | |
Operating Temperature | (-40) - 163 | °C | - |
Glass Transition Tempearture | 93.0 | °C | - |
Value | Units | Test Method / Conditions | |
Cure Type | Room temperature or Heat Cure | - | - |
Value | Units | Test Method / Conditions | |
Hardness | 87.0 | Shore D | - |
Value | Units | Test Method / Conditions | |
Specific Gravity (Mixed) | 1.07 | gm/cc | - |
Reactive Solids Contents | 100.0 | % | - |
Pot Life (Double the viscosity, 25°C) | 60 | minutes |
Value | Units | Test Method / Conditions | |
Tensile Shear Strength (Alum to Alum) | 2700.0 | psi | - |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Cure Schedule
4 to 6 hours 65°C 24 hours 25°C 20 min 177°C 30 min 121°C 80 min 93°C
Packaging & Availability
- Availability
This epoxy can be supplied in various different packages.
10ml Easy Dispensing System *New*, 50ml Dual Cartridge, 2.5gm pouch(s), 5gm pouch(s), 10gm pouch(s), 100gm kit(s), 250gm kit(s), Mixing Tip, Dispensing Gun 50 ML.