Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
AA-DUCT 916 is two-part, smooth paste adhesive of refined pure silver and epoxy resin components. It is free of solvents and copper or carbon additives. It develops strong, durable, resilient, electrically and thermally conducting bonds and coatings between many different and dissimilar materials such as metals, ceramics, glass and plastic insulates.
- Benefits
- High strength
- Perfect bond
- Cold solder for heat sensitive components
Applications & Uses
- Applications
- Application Area
- Applications
AA-DUCT 916 cures at room temperature and can be used as a flexible "cold-solder" for heat-sensitive components where hot-soldering is impractical. It also can be used for the assembly and repair of electrical modules, flexible circuits, wave guides, flat cable and high frequency shields.
- Substrates
Excellent choice aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards.
- How To Use
- Carefully clean and dry all surfaces to be bonded.
- Apply AA-DUCT 916 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.
- Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.
- Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallized epoxy components do not react as well as liquid components and should be re-dissolved prior to use for best results.
Properties
- Physical Form
- Appearance
- Silver
- Thermal Properties
- Typical Properties
- Electrical Properties
- Cured Properties
- Uncured Properties
| Value | Units | Test Method / Conditions | |
| Thermal Conductivity | 10.4 | BTU-in/hr-ft²-°F | — |
| Glass Transition Tempearture | 5.00 (41.0) | °C(°F) | — |
| Operating Temperature | (-60) - 110 | °C | — |
| Value | Units | Test Method / Conditions | |
| Cure Type | Room temperature or Heat Cure | — | — |
| Value | Units | Test Method / Conditions | |
| Cured (5min, 160°C) | 0.0006 | ohm-cm | — |
| Cured (24hrs, 25°C) | 0.0008 | ohm-cm | — |
| Cured (2hrs, 65°C) | 0.0008 | ohm-cm | — |
| Cured (1hr, 110°C) | 0.0012 | ohm-cm | — |
| Value | Units | Test Method / Conditions | |
| Hardness | 60.0 | Shore D | — |
| Volume Resistivity | max. 0.002 | ohm. cm | — |
| Value | Units | Test Method / Conditions | |
| Specific Gravity (Mixed) | 0.98 | — | — |
| Reactive Solids Contents | 100.0 | % | — |
| Pot Life (25°C, 100 grams) | 1.5 | hours | — |
| Viscosity (25°C) | 210 | cps | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Cure Schedule
1 to 4 Hours 65°C 24 hours 25°C
Packaging & Availability
- Availability
This epoxy can be supplied in various different packages.
Size - 1.5gm pouch, 2.5gm pouch, 5gm pouch, 50gm kit, 70gm kit, 100gm kit, 250gm kit, 500gm Jar kit
Storage & Handling
- Shelf Life
- 1 year