Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Atul Ltd Company Logo

LAPOX® AC-14

1 of 15 products in this brand
LAPOX® AC-14 is a chemically 2,4,6-tris(dimethyl aminomethyl) phenol. It is tertiary amine accelerator recommended to use along with other curing agents like polyamidoamides, amine adducts, mercaptans and anhydrides to increase cure speed. It improves cure of thin film and facilitate complete cure. The amount of Lapox AC-14 to be added into hardener depends on the speed of cure required.

Functions: Catalyst

Chemical Family: Phenols & Phenolics

Compatible Polymers & Resins: Polyamides, Polyamines

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Phenols & Phenolics

CASE Ingredients Functions

Catalyst

Technologies

CASE Ingredients

Product Families

CASE Ingredients — Additives

Catalysts & Initiators

Chemical Structure

LAPOX® AC-14 - Chemical Structure

Features & Benefits

CASE Ingredients Features

Fast Cure,

Fast Drying,

Faster Cure Time

Advantages

Faster drying of films
Increases cure speed
Light colour

Applications & Uses

Markets

Adhesives & Sealants,

Electrical & Electronics,

Paints & Coatings

Applications

Adhesives & Sealants — Other Adhesives & Sealants Applications

Electrical & Electronics — Other Electrical & Electronics Applications

Paints & Coatings — Other Paints & Coatings Applications

Compatible Polymers & Resins

Polyamides,

Polyamines

Applications

Adhesives and sealants
Paints
Protective coatings

Recommended dosage

0.5 - 10w/w

Properties

Physical Form

Liquid

Appearance
Clear, yellow liquid
Typical Properties
ValueUnitsTest Method / Conditions
Colormax. 6GSASTM D1544
Amine value580 - 635mg KOH/gASTM D2073
Viscosity at 25°C150 - 300m PasASTM D2196

Regulatory & Compliance

Certifications & Compliance

ISO 14001

Safety & Health

Safety

Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, the resin should be washed off immediately with soap and
warm water. Avoid breathing vapors, mist or gas. Please refer to the SDS for detailed safety instructions.

Packaging & Availability

Packaging Type

Drums

Packaging

Lapox AC-14 is available in 200 kg MS | HDPE drums and 1,000 kg IBC. Other packing may be considered on request.

Storage & Handling

Storage & Handling

Lapox AC-14 should be stored in a cool and dry place, preferably in a sealed container and should not be exposed to direct sunlight. This product has a shelf-life of 1 year, if stored in
its original container between 18°C and 25°C away from humidity and excessive heat. Please refer to the Safety Data Sheet (SDS) for detailed instructions on storage and handling.

Spills and disposal

In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other
suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state
or local regulations, as applicable.