Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- CASE Ingredients Features
- Advantages
Good inter coat adhesion
Improved flexibility
Long working time
Superior corrosion resistance
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Compatible Substrates & Surfaces
- Coating Type
- Applications
General purpose epoxy adhesive
Maintenance coating
Primers and paints- Processing
High speed dispersion for paints
Properties
- Physical Form
- Appearance
- Yellowish-brown liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Color | max. 9 | GS | ASTM D1544 |
| Amine value | 290 - 320 | mg KOH/g | ASTM D2073 |
| Viscosity at 25°C | 45,000 - 60,000 | m Pas | ASTM D2196 |
| Density at 20°C | 0.96 - 0.98 | g/cm3 | - |
| AHEW | 105 - 124 | g/eq | - |
| Recommended Ratio | 55 - 65 | w/w | - |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Safety
Wear personal protective equipment (PPE). Avoid contact with the eyes and skin. In case of direct contact and irritation, the resin should be washed off immediately with soap and warm water. Avoid breathing vapors, mist or gas. Please refer to the SDS for detailed safety instructions.
Packaging & Availability
- Packaging Type
- Packaging
Lapox AH-712 is available in 200 kg MS | HDPE drums and 1,000 kg IBC. Other packing may be considered on request.
Storage & Handling
- Storage & Handling
Lapox AH-712 should be stored in a cool and dry place, preferably in a sealed container and should not be exposed to direct sunlight. This product has a shelf-life of 1 year, if stored in its original container between 18°C and 25°C away from humidity and excessive heat. Please refer to the Safety Data Sheet (SDS) for detailed instructions on storage and handling.
- Spills and disposal
In case of spills, sweep up and shovel the spilled material. Keep spilled material in suitable, closed containers for disposal. Soak up with an absorbent such as clay, sand or other suitable material. Flush area with water to remove trace residue. Do not allow the product to reach the sewage system. Waste must be disposed of in accordance with federal, state or local regulations, as applicable.