Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Foam Type
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features & Benefits
Features and Benefits
- Excellent memory and low stress relaxation reduces maintenance costs associated with gasket failures due to compression set and softening.
- Resistance to ultraviolet light, ozone, extreme temperatures and flame enables Auburn silicone foams to perform consistently in all environments.
- Compact cell structure and unique formulation provides enhanced sealing performance with resistance to penetration of fine particles or winddriven rain.
- Available in roll goods, slit tapes or custom die cut parts. All Auburn silicone foams are available either plain or with an adhesive backing applied to one or both surfaces.
Applications & Uses
- Applications
- Application & Uses
Applications
- Environmental seals to protect against penetration of dust, moisture, air, or light into outdoor enclosures such as lighting fixtures, HVAC units or electronic cabinets.
- Vibration isolators in electronic components or transportation vehicles.
- Shock absorbing cushions, pads or gaskets.
Properties
- Flame Rating
- Physical Form
- Environmental Properties
- Typical Properties
- Fire & Smoke Properties
- Temperature Properties
- Flame Characteristics
- Typical Thermal & Electrical Properties
| Value | Units | Test Method / Conditions | |
| Water Absorption (Internal, 24 hrs at Room Temperature) | 1.4 | % | - |
| UV Resistance | No Degradation | - | SAE J -1960 |
| Ozone Effect Rating | 0 (No Cracks) | - | ASTM D 1171 |
| Corrosion Resistance | Pass | - | AMS 3568 |
| Value | Units | Test Method / Conditions | |
| Thickness | 0.8 - 12.7 | mm | - |
| Standard Width | 914.0 | mm | - |
| Density (Force Measuredat 25% Deflection) | 22.0 | Ib/ft³ | ASTM D 1056 |
| Compression Force Deflection (70°C) | 9.0 | psi | ASTM D 1056- Test D |
| Compression Set, Typical ( 100°C) | max. 1 | % | ASTM D 1056 Test D |
| Tensile Stength | 45.0 | psi | ASTM D 412 |
| Elongation | 80.0 | % | ASTM D 412 |
| Value | Units | Test Method / Conditions | |
| Smoke Density (4.0 minutes) | max. 50 | - | ASTM E 662 |
| Toxic Gas Emissions Rating | Pass | - | SMP-800C & BSS 7239 |
| Value | Units | Test Method / Conditions | |
| Low Temperature Filex (55°C) | Pass | - | ASTM D 1056 |
| Recommended Use Temperature | 55 - 200 | °C | SAE J-2236 |
| Recommended Intermittent High Temperature Use | 250.0 | °C | Internal |
| Value | Units | Test Method / Conditions | |
| Flame Resistance | Listed V-0 and HF-1 | - | UL 94 |
| Flame Spread Index | max. 25 | - | ASTM E 162 |
| Value | Units | Test Method / Conditions | |
| Dielectric Constant | 1.42 | - | ASTM D 150 |
| Dielectric Strength | 91.0 | Volts/mil | ASTM D 149 |
| Dry Arc Resistance | 92.0 | - | ASTM D 495 |
| Volume Resistivity | 10¹⁴ | Ohm- cm | ASTM D 257 |
| Thermal Conductivity | 0.63 | W/m°K | ASTM C 518 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Technical Details
Standard Thickness Tolerance Standard Thickness (Inches) Tolerance (Inches)
0.031 ±0.015 0.062 ±0.02 0.093 ±0.02 0.125 ±0.025 0.188 ±0.025 0.25 ±0.03 0.375 ±0.045 0.5 ±0.05 Width Tolerance (Cellular) Nominal Width (Inches) Tolerance (w/o PSA) Tolerance (with PSA)
0 < T ≤ 3 ±0.063 ±0.031 3 < T ≤ 8 ±0.094 ±0.031 8 < T ≤ 12 ±0.125 ±0.031 12 < T ≤ 18 ±0.188 ±0.031 18 < T ≤ 26 ±0.219 ±0.063 26 < T ≤ 36 ±0.25 ±0.063
Packaging & Availability
- Packaging Type