Knowde Enhanced TDS
Identification & Functionality
- Backing Material Type
- Product Type
- Technologies
Features & Benefits
- Labeling Claims
- Ready-to-Use Product Features
- Features
- Double coated tape construction.
- Low outgassing high performance modified acrylic adhesive.
- Tissue carrier.
- Poly coated kraft release liner.
- Environmental Resistance
- Chemical Resistance
- Benefits
- Dimensional stability and good die cutting characteristics.
- Solvent free adhesive with good foam bonding performance.
- Good heat resistance.
- Flexibility and conformability along with the ability to tear by hand.
- Good moisture stability and lay flat properties.
Applications & Uses
- Applications
- Application Area
- Common Applications
- Automotive
- General Converting
- White Goods
- Transportation
- Product Construction
Liner: 87# White Poly Coated Kraft
Adhesive 1: Low VOC Acrylic
Carrier: Tissue
Adhesive 2: Low VOC Acrylic- Application Techniques
- It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry, and free of grease or oil.
- Bond strength is dependent upon the amount of adhesive-to-surface contact developed.
- Note that different pressure, time and temperature on different (film / rigid) surface achieves different performance.
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Application Temperature | min. 30 | ºC | — |
| Loop Tack (180º, 20 in (508 mm) / min at Room Temperature), (Substrate SS - Liner - Initial) | 528.0 | N/m | ASTM D6195 |
| Peel Adhesion (180º, 12 in (305 mm) / min), (Substrate ABS - Liner - 72 hr dwell) | 1233.0 | N/m | ASTM D3330 |
| Peel Adhesion (180º, 12 in (305 mm) / min), (Substrate ABS - Unwind - 72 hr dwell) | 1233.0 | N/m | ASTM D3330 |
| Peel Adhesion (180º, 12 in (305 mm) / min), (Substrate SS - Liner - 72 hr dwell) | 704.0 | N/m | ASTM D3330 |
| Peel Adhesion (180º, 12 in (305 mm) / min), (Substrate SS - Unwind - 72 hr dwell) | 881.0 | N/m | ASTM D3330 |
| Service Temperature | -40 to 175 | ºC | — |
| Static Shear Failure Time (180º, 1" sq (6.5 cm2), 1000 g), (Substrate SS - Liner - 24 hr dwell) | min. 10000 | Mins | ASTM D3654 |
| Thickness (Adhesive 1 - Liner) | 61.0 | µm | ASTM D3652 |
| Thickness (Adhesive 2 - Unwind) | 61.0 | µm | ASTM D3652 |
| Thickness (Carrier) | 56.0 | µm | ASTM D3652 |
| Thickness (Liner) | 173.0 | µm | ASTM D3652 |
| Thickness (Total Caliper) | 178.0 | µm | ASTM D3652 |
| Thickness (Total Caliper without Liner) | 290.0 | µm | ASTM D3652 |
Storage & Handling
- Storage / Shelf Life
Two years when stored at 64 - 72ºF (18 - 22ºC) / 30 - 70% relative humidity, out of direct sunlight and in original packaging.