Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Where to Use
- AVM 410 Epoxy Primer may be used with various AVM waterproofing systems and deck coatings.
- It is specifically formulated to improve acrylic and polyurethane elastomeric membrane adhesion to concrete and plywood and to properly treated metal. AVM 410 Epoxy Primer is compliant with Southern California’s AQMD’s requirements.
- Installation
Installation
Surface Requirements: Successful bonding requires structurally sound and clean substrates. The substrate must be cleaned to ensure that it is free of all oils, any laitance, greases or other contaminants, such as concrete curing compounds, that may cause poor adhesion of the AVM 410 Epoxy Primer. After cleaning, the surfaces should be rinsed thoroughly to remove loose particles and dust created during shot-blasting or grinding and traces of any cleaning chemicals which may have been used. Primers, adhesives, detailing, membranes, etc. should not be applied until the surface is dry.
Mixing Instructions: Both Part-A and Part-B should be thoroughly agitated prior to mixing to ensure a homogeneous material. The AVM 410 Epoxy Primer must always be mixed in the ratio of two parts Part-A with one part Part-B (Part-A: Part-B = 2:1). The combined components should be thoroughly mixed for at least 2 minutes. Induction time is not required. Application: The AVM 410 Epoxy Primer should be applied at the approximate rate of 1 gallon per 300 square feet. It can be applied using a brush or phenolic core roller. Actual coverage may vary based on job conditions and other factors. For moisture mitigation, apply the 410 Epoxy Primer at the rate of 225 sq.ft. /gallon to a minimum thickness of 7 mils. Curing: Allow to cure until dry to the touch, but still tacky. Then apply the next coating. If fully cured, re-prime. Pot life and curing times may vary based on temperature and other job conditions. Equipment Cleanup: Equipment should be cleaned immediately after use with an environmentally-safe solvent, as permitted under local regulations. The primer is difficult to remove after it has cured.Quality Control
Verify all surfaces have been properly coated. Make sure all surfaces are a minimum 7 mils thick when used as a moisture barrier.
Striping: It is recommended that an Epoxy paint be used for line striping
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Coverage Rate (As Primer) | 300.0 | ft²/gal | - |
| Coverage Rate (Moisture Barrier) | 225.0 | ft²/gal | - |
| Film Thickness per Coat | 3 - 5 | mills | - |
| Film Thickness per Coat (Moisture Barrier) | min. 7 | mills | - |
| VOC | 40.0 | g/L | 60 appendix A7 Method 24 0 g/L |
| VOC | 0.0 | G/L | - |
| Solids Content | 100.0 | % | - |
| Compressive Strength | 12.0 | psi | ASTM D695 |
| Tensile Strength | 5.6 | psi | ASTM D638 |
| Tensile Elongation | 2.6 | % | ASTM D638 |
| Permeability Ranking | 0.158 | perms | ASTM E 96 |
| Adhesion | min. 480 | psi | ASTM D 7234 |
| Microbial Resistance | Passes Rating 1 | - | ASTM G21 |
| Alkali Resistance | Resistant | - | ASTM D1308 |
| Coverages | 300 or 225 | sq.ft./gal | - |
Packaging & Availability
- Approximate Shipping Weights
- 30 Lbs
- Packaging
The AVM 410 Epoxy Primer is packaged in kit form. The Volume Mixing ratio is 2 parts Part-A to 1 part Part-B (Part-A / Part-B = 2:1). It is available in three (3) gallon kits.
Storage & Handling
- Delivery, Storage, and Handling
- Delivery of the 410-Epoxy Primer materials to the job site must be in their original sealed containers, with manufacturer’s name and label intact.
- Handle and store containers and bags in accordance with printed instructions.
- Store at temperatures between 50°F and 90°F. Do not store materials in direct sunlight or where they may be damaged by water or rain.
- Keep all materials out of the reach of children.
- If irritation occurs during use, liberally flush affected areas with water. If irritation continues, see a physician immediately
Shelf Life
Twelve (12) months after manufacture when continuously stored indoors in the original unopened containers in accordance with AVM’s storage conditions.