Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Where to Use
On new or existing concrete or plywood decks and other substrates.
- Project Conditions & System Application
Project Conditions
- Do not apply Primer 100 at temperatures below 50°F, or if precipitation is imminent, or above 90°F if applying in direct sun light.
- Provide adequate ventilation during installation.
- Warn personnel against hazards of Primer 100 to skin and eyes.
- Protect adjacent surfaces which could be damaged during the application.
System Application
Install the Primer 100 in accordance with each system’s Installation Instructions.
Substrates
Plywood must be min 5/8” thick, exterior grade, attached to framing spaced max 16” on center and properly blocked, supported and fastened. Concrete decks must comply to code and be min 2000 PSI after 28 days curing time. Refer to each system’s installation instructions for more information. Preparation of Substrates The substrate surfaces must be structurally sound, clean, dry, free of contamination, and prepared according to each system’s Installation Instructions. Installation Typically Applied with brushes and rollers.
Clean Up
- Tools may be cleaned with water before Primer 100 is dry.
- Coverage
- Over Plywood - 200-300 sq. ft./gal.
- Over Concrete - 200-300 sq. ft./gal.
- Over Sheet Metal - 200-300 sq. ft./gal.
Properties
- Color
- Typical Properties
| Value | Units | Test Method / Conditions | |
| VOC | 93.0 | Grams/Liter | - |
Regulatory & Compliance
- Approval Systems
AVM primer 100 has been thoroughly tested and is a component of the following ICC/LARR approved systems: ICC ESR-2125, ESR-2662, PMG-2662 and L.A. RR#: 25430.
Packaging & Availability
- Packaging Type
- Approximate Shipping Weights
- 18 lbs.
- Packaging
2.0/5.0 gal. pails
Storage & Handling
- Shelf Life
- One year in original unopened packaging.
- Delivery, Storage, and Handling
- Delivery of the Primer 100 to the job site must be in their original sealed containers, with manufacturer’s name and label intact.
- Handle and store containers in accordance with printed instructions.
- Store at temperatures between 50°F and 90°F. Do not store Primer 100 in direct sunlight or where it may be damaged by water or rain. If frozen, discard
- Keep Primer 100 out of the reach of children.
- If irritation occurs during use, liberally flush affected areas with water. If irritation continues, see a physician immediately