company tower banner

Elastex

AWP Rohstoff GmbH Brand

Supplier:AWP Rohstoff GmbH

Products:37

AWP TPE-S Elastex is the trade name of our Thermoplastic Elastomers. The Elastex qualities combine the rubber-elastic behavior of a rubber and a thermoplastic processing behavior. Elastex is manufactured on the basis of SBS or SEBS. Depending on requirements, the Elastex grades are available modified, including the following optimizations: UV stabilized, heat aging stabilized, slip and demoulding aids, adhesion-modified or vibration and impact absorbing.

View All Elastex Products

Elastex™ 540AE7

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion, Injection Molding

Elastex™ 540AE7 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Elastex™ 545AE3

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion, Injection Molding

Elastex™ 545AE3 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Elastex™ 550AE3

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion, Injection Molding

Elastex™ 550AE3 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Elastex™ 555AE3

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Strain at Break:400.0 - 400.0 %

Elastex™ 555AE3 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Elastex™ 565AE8

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Strain at Break:400.0 - 400.0 %

Elastex™ 565AE8 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Elastex™ 573AE3

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Strain at Break:400.0 - 400.0 %

Elastex™ 573AE3 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Elastex™ 580AE3

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Strain at Break:400.0 - 400.0 %

Elastex™ 580AE3 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Elastex™ 635AT4

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion, Injection Molding

Elastex™ 635AT4 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Elastex™ 660AT4

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Strain at Break:600.0 - 600.0 %

Elastex™ 660AT4 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Elastex™ 735AT4

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):37.0 - 37.0 %

Elastex™ 735AT4 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Elastex™ 745AT4

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Injection Molding, Extrusion
Strain at Break:500.0 - 500.0 %
Compression Set (70 °C):42.0 - 42.0 %

Elastex™ 745AT4 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Elastex™ 540AE3

Polymer Name:Styrenic Thermoplastic Elastomer
Processing Methods:Extrusion, Injection Molding

Elastex™ 540AE3 by AWP Rohstoff GmbH is comprised of Styrenic Thermoplastic Elastomer. It is commonly used

Knowde Brand Summary

Identification

Chemical Family: Styrenics
Polymer Name: Styrenic Thermoplastic Elastomer
Technologies: Elastomers
Product Families: Thermoplastic Elastomers
Styrenic Thermoplastic Elastomers (TPE-S)

Applications & Uses

Plastics & Elastomers Processing Methods: Extrusion,
Injection Molding