Knowde Enhanced TDS
Identification & Functionality
- Technologies
Features & Benefits
Applications & Uses
- Markets
- Applications
- Application Technique
- Uses
MnBooster™ 2.0 is effective on crops with high Manganese requirements:
- Soybeans
- Potatoes
- Fruit & Vegetable Crops
- Wheat
- Sugarbeets
- Beans
- Directions for Use
Always shake before use. If ever residues are present, these are normally water soluble. After the product has been poured, add water (warm if possible), shake, rinse and pour into sprayer. If mixing, check compatibility in a jar before use. Start by filling the sprayer to 75% of its capacity with water then add the herbicide or the fungicide, fill with water to reach 100% of capacity, add the CropBooster® 2.0 or RR SoyBooster® 2.0 and finally add the MnBooster™ 2.0. Agitation is mandatory throughout the mixing process but also thoughout the application of the tank mix.
FOLIAR TREATMENTS: For best results, treat when plant needs are highest or as soon as deficiency symptoms appear. Treat the crop early in the morning, late in the day or during overcast periods. It is recommended to use 200 L of water per ha. With Ultra Low Volume (U.L.V.) sprayers, use at least 50 L of water/ha. If the spray solution is too concentrated, slight injury to the leaves could occur. For aerial applications, do not use more than one (1) L of this product for every four (4) L of water.
- Rate of Application
Product can be used alone at a rate of 2.0 L/ha (0.8 L/ac). Product is fully compatible with CropBooster® 2.0 and RR SoyBooster® 2.0. The mixtures of MnBooster™ 2.0 and CropBooster® 2.0 or MnBooster™ 2.0 and RR SoyBooster® 2.0 can be mixed with herbicides or fungicides to get highest biostimulant effect supplied by the 2.0 Technology. Repeat applications of MnBooster™ 2.0 if deficiency symptoms persist.
Properties
- Physical Form
Regulatory & Compliance
- Chemical Inventories
Safety & Health
- Hazard Statements
- May be corrosive to metals
- Causes severe skin burns and eye damage
- May cause damage to organs ( state all organs affected, if known) through prolonged or repeated exposure (state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard)
- May cause long lasting harmful effects to aquatic life
- Precautionary Statements
- Wear protective gloves/protective clothing/eye protection/face protection
- Do not breathe dust/fume/gas/mist/vapors/spray
- Keep only in original packaging.
- Avoid release to the environment.
- Safety
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse skin with water/shower. Get medical advice/attention if you feel unwell.
Packaging & Availability
- Packaging
Net Content - 12.9 Kilograms
Available Packages - 10L, 200L, 1000L
Storage & Handling
- Storage
This product must be kept above 5 °C and must not be stacked more than two (2) pallets high with each pallet three (3) jugs high.