company tower banner

Products

BARLOG plastics GmbH Brand

127 Products found on BARLOG plastics GmbH

Kebaflex® P D35.1 banner

Kebaflex® P D35.1

Density:1090.0 - 1090.0 kg/m³
Strain at Break:600.0 - 600.0 %

Polyester elastomer, Shore D35

Kebaflex® / SG 80 A.05 banner

Kebaflex® / SG 80 A.05

Strain at Break:710.0 - 710.0 %

TPE-S, Shore A80

Kebaflex® SG 60 A.01 banner

Kebaflex® SG 60 A.01

Strain at Break:680.0 - 680.0 %

TPE-S, Shore A60, natural

Kebaflex® / SG 80 A.01 banner

Kebaflex® / SG 80 A.01

Strain at Break:670.0 - 670.0 %

TPE-S, Shore A80

Kebaflex® SG 40 A.01 black banner

Kebaflex® SG 40 A.01 black

Strain at Break:540.0 - 540.0 %

TPE-S, Shore A40, black

Kebaflex® / SG 45 HT A.01 Black banner

Kebaflex® / SG 45 HT A.01 Black

Strain at Break:250.0 - 250.0 %

TPE-S, Shore A46, black

Kebaflex® / SG 85.E A.02 banner

Kebaflex® / SG 85.E A.02

Strain at Break:660.0 - 660.0 %

BARLOG plastics GmbH Kebaflex® / SG 85.E A.02 is a TPE-S, Shore A86, extrusion. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

Kebaflex® / SG 60 HT A.01 black banner

Kebaflex® / SG 60 HT A.01 black

Strain at Break:315.0 - 315.0 %
Compression Set (70 °C):30.0 - 30.0 %

TPE-S, Shore A60, black, improved compression set at high temperatures

Kebaflex® / E 35.2 banner

Kebaflex® / E 35.2

Density:950.0 - 950.0 kg/m³
Compression Set (70 °C):33.0 - 33.0 %

BARLOG plastics GmbH Kebaflex® / E 35.2 is available in various shore hardnesses from A35 to D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 120°C and is pleasant to the touch.

Kebaflex® - H / SABS 70 A.03 Black banner

Kebaflex® - H / SABS 70 A.03 Black

Strain at Break:618.0 - 618.0 %
Compression Set (70 °C):64.0 - 64.0 %

TPE-S, Shore A69, black, modified for good adhesion to ABS, PC and ABS / PC blends.

Kebaflex® / P FE190201 banner

Kebaflex® / P FE190201

Density:1010.0 - 1010.0 kg/m³
Strain at Break:650.0 - 650.0 %

Polyester elastomer, Shore D25, suitable for food contact

Kebaflex® / U D72 ST B.01 banner

Kebaflex® / U D72 ST B.01

Density:1250.0 - 1250.0 kg/m³
Strain at Break:345.0 - 345.0 %

BARLOG plastics GmbH Kebaflex® / U D72 ST B.01 is a TPU with a Shore hardness of 72D. It is characterized by flexibility and good wear and abrasion resistance.

Show

of 127 results