Products

Special compound for 3D effect painting based on PP, e.g. B. For decorative applications in the automotive exterior.

BARLOG plastics GmbH Keballoy® EP 23 is an unreinforced ABS / PC polymer blend, which is particularly suitable for the production of sophisticated chrome-plated components. It is also optimized for very good adhesion of the electroplating layer and has a wide process window.

PPS functional compound for the production of plastic-bonded magnets

PBT + X-GF45, 45% glass fiber reinforced, optimized surface quality, improved weld line strength and reduced tendency to warp, color settings with approval for food contact available.

PPS functional compound for the production of plastic-bonded magnets

PPS functional compound for the production of plastic-bonded magnets

PBT unreinforced, medium viscosity, injection molding type with optimized toughness

BARLOG plastics GmbH Keballoy® / EP FE 170404 is an unreinforced ABS / PC polymer blend, which is particularly suitable for the production of sophisticated chrome-plated components. It is also optimized for very good adhesion of the electroplating layer and has a wide process window. In addition, it has an increased heat resistance compared to Keballoy® / EP23 and an improved flow compared to Keballoy® / EP 23 and Keballoy® / EP 25.

PBT unreinforced, injection molding type, approved for use in contact with food

POM copolymer unreinforced, medium viscosity

PPS functional compound for the production of plastic-bonded magnets

POM copolymer unreinforced, medium viscosity, UV stabilized

BARLOG plastics GmbH Keballoy® / EP 23 weiß 010501 white 010501 is an unreinforced ABS / PC polymer blend in RAL9010 (pure white), which is particularly suitable for the production of sophisticated chrome-plated components. It is also optimized for very good adhesion of the electroplating layer and has a wide process window.

BARLOG plastics GmbH Keballoy® / EP 25 is an unreinforced ABS / PC polymer blend, which is particularly suitable for the production of sophisticated chrome-plated components. It is also optimized for very good adhesion of the electroplating layer and has a wide process window. In addition, it has increased heat resistance compared to Keballoy® / EP23.

PA12 functional compound for the production of plastic-bonded magnets

PBT unreinforced, highly impact modified

TPE-S, Shore A69, black, modified for good adhesion to ABS, PC and ABS / PC blends.

TPE-S, Shore A67, natural, modified for good adhesion, etc. On ABS, PC and PC / ABS blends, compliant for food contact according to EU 10/2011.

TPE-S, Shore A65, translucent. Abrasion resistant, high dynamic resilience, good DVR and good adhesion to PP in 2K injection molding.

PBT-GF30, PBT, 30% glass fiber reinforced, approved for use in food contact

BARLOG plastics GmbH Kebaflex® / SG 85 HT A.01 is a TPE-S, Shore A85, with improved compression set at high temperatures. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

TPE-S, Shore A79, natural, modified for good adhesion, etc. On PBT and PBT blends. KEBAFLEX - H / SPBT 70 A.02 natural was developed specially for use outdoors (UV stabilization) and has an optimized demolding behavior.

PBT-GF50, PBT, 50% glass fiber reinforced, approved for use in food contact

TPE-S, Shore A60, modified for good adhesion, etc. On PBT and PBT blends.

PBT unreinforced, injection molding type, also suitable for extrusion, highly viscous

PPS functional compound for the production of plastic-bonded magnets

TPE-S, Shore A80, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY).

PBT + PCT, unreinforced, increased heat resistance, impact modified

PA12, functional compound for the production of plastic-bonded magnets. Due to the high degree of filling with rare earths, KEBABLEND / M 48/67 PA12 enables the injection molding of very powerful magnets.

BARLOG plastics GmbH Kebaflex® / FE 170403 is a TPE-S, Shore A85, modified for good adhesion to various polyamides such as PA6, PA66, PA6.12, etc. It is available in various Shore hardnesses from below A10 to more than D50 and is often used as a substitute for rubber due to the cost-effective processing in the injection molding process. It is soft and flexible, can be colored freely, shows good elastic behavior up to 100°C and is pleasant to the touch. A wide range of modified compounds is available, e.g. adhesion-modified types for 2K injection molding, printable types, variants with optimized compression set, etc.

PBT-GF20, PBT, 20% glass fiber reinforced, approved for use in food contact

TPE-S, Shore A60, natural, modified for good adhesion to polyamides such as PA6, PA66, PA6.12 or partially aromatic PA types such as e.g. GRIVORY GV or GRIVORY HT (manufacturer EMS-GRIVORY)

BARLOG plastics GmbH Keballoy® C43 is an unreinforced PC / ABS polymer blend, which has advantages over the Keballoy® EP types in terms of mechanical properties due to the increased PC content. It has a particularly good combination of rigidity and toughness and impresses with its easy processing.

BARLOG plastics GmbH Keballoy® 3D 10001 PC/ABS is a special compound for 3D effect painting (three-dimensional hologram-like decoration) based on PC / ABS with optimized notched impact strength, e.g. B. For decorative applications in automotive interiors.

PA12 functional compound for the production of plastic-bonded magnets

TPE-S, Shore A54, modified for good adhesion to polyamides such as PA6, PA66, PA12 or partially aromatic PA types such as e. g. GRIVORY GV (manufacturer EMS-GRIVORY)