Products

PBT unreinforced, flame retardant

PPS-GF40, linear PPS, 40% glass fiber reinforced, approved for food applications according to EU and FDA guidelines.

PPS, cross-linked, GF 40, with improved hydrolysis resistance for applications in the automotive engine compartment.

PPS, cross-linked, reinforced with 30% high-performance carbon fiber. For extreme strength and rigidity even at high temperatures. Very good wear resistance in sliding and friction applications.

KEBABLEND / EC FE 190106 PPS is a special compound based on PPS, which is electrically conductive.

BARLOG plastics GmbH Kebaflow® LCP HF130 is an LCP reinforced with 30% short glass fibers with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 300 °C), good chemical resistance.

linear PPS, 30% glass fiber reinforced, impact resistant

PPS, linear, unreinforced, impact modified

PPS-GF30, linear PPS, 30% glass fiber reinforced, impact resistant, approved for food applications according to EU and FDA guidelines.

Plain bearing material based on PPS, PPS + carbon fiber + graphite

PPS-CF, PPS carbon fiber reinforced

linear PPS, 20% glass fiber reinforced, laser weldable, natural

linear PPS, 30% glass fiber reinforced, impact resistant, hydrolysis stabilized

PPS-GF40, linear PPS, 40% glass fiber reinforced

PPS-MD60, linear PPS, 60% mineral filled, good surface quality

linear PPS, 40% glass fiber reinforced, impact resistant

linear PPS, 40% glass fiber reinforced, easy flowing, reduced burr formation

BARLOG plastics GmbH Kebaflow® / LCP MM140 FE 180404 is an LCP reinforced with 40% mineral with very high heat resistance. The material is characterized by the following properties: good flowability with thin walls, very good toughness and strength, inherently flame retardant, high heat resistance (HDT ~ 270 °C), good chemical resistance.